Search the Community
Showing results for tags 'wiimote'.
Found 4 results
I wanted to share this - after research I've managed to get full light guns working with light gun games in Mame. I've done this on windows 7 and now 8.1. I can't confirm it'll work on 10 Requirements: Mayflash Dolphin Bar Wiimote(s) Tochmote Software (GIT Here) Mame UIFX Mame (not working with .180, but tested w/.174 and .175 dinput builds) It is a little tricky to get set up but I've been using it for awhile and I wanted to throw down a quick walk through of my settings and how I got it set up. Download required software and install. Keep dolphinbar on position 4 - this makes everything nice when you go to use other emulators - no change required . TURN YOUR CONTROLLERS ON IN THE WAY YOU WANT THEM ON WHENEVER YOU WILL BE PLAYING I cant stress this enough due to the way xnput handles slots. If you navigate lb/bb with xbox 360 controller then switch to this setup - you'll want your remotes in 2/3 slot. Otherwise you'll be resetting bindings all day everyday. I personally set mine to 1 and 2 and turn off my xbox controller when I'm going to play light gun games and nav with the keyboard. - one though - is if you want to nav with wiimote - think about setting arrow keys in the touchmote setup as well as one of your buttons for "enter" and another for escape. Touchmote Setup In Touchmote - pair your wii controller and set your motes up with Layouts- . Go to settings then controller config - and hit the plus. I have named mine Mame Light Gun 1 and Mame Light Gun 2. I would delete all but the default profile and just keep the 3 in the list of configs (more on why later). To set up profiles it is pretty easy - on the right side there is a list of outputs which you can filter by device. You can safely leave it in all, and just scroll the list. Remember when setting these - Green boxes are xinput controls, Yellow boxes are keyboard keys, Red are mouse controls. If you set set escape to a button, make sure to set it to one you will not be using in game obviously) Set up profiles like this - For Mame 1 you're going to want to set your pointer to "mouse cursor". You'll also need to set plus, minus a, b 1 and 2 to whatever keyboard keys or xinput buttons you want. Number pad works pretty well. For Mame 2 set your pointer to "left" or "right" stick under xbox 360 (green box) This will give your cause the left stick to function similar to a mouse for aiming your light gun. You'll cycle through these profiles after opening touchmote. When you're ready to play a game, open touchmote, hold "home" on the controller and use up or down dpad then a to select layout. You'll set 1 for P1 and 2 for P2. Mame Basic Setup Extract into your mame directory (you may want to make a new one just for these games and direct RL to use this emulator since you'll be messing with settings) the version of non uifx mame you want to use (I use .174 mame.) Extract over top of that the mame uifx (I use .175) Open Mameuifx64.exe - and find your light gun game, right click and edit properties (alt+g when selected). Under Controller - tick enable mouse, enable joystick, enable light gun, enable off screen reload. You'll also want to move your sliders for deadzone and saturation - this effects player 2's pointer set to a stick). mine are set to .06 deadzone and 0.50 saturation. Under Controller Mapping I set paddle, dial, adstick, trackball, pedal and positional to keyboard, mouse to mouse and lightgun to lightgun. Hit okay to close and save all changes. You can also set properties for these under "properties for XXXXcabinet the one if you right click on the game under the alt+g set properties" but do not do this unless you find yourself needing to trouble shoot that cabinet. I know it is not necessary for jaguar.cpp) Setting Controls Open Touchmote and pair controllers. Hold home on each wiimote and select "mame light gun 1" and "mame light gun 2" on your two remotes. Remember I usually set light 1 to 1 and light 2 to 2 to remember player 1 and 2. This is why you wanted to clear out layouts earlier - makes quick setting when you go to play. Open your game up in mame64uifx - hit tab, and hit input for this machine with your keyboard. You'll hit enter to set each control. So for example, set coin 1 to minus by hitting enter - then minus - you'll see the key/button you set in touchmote pop up. If you don't - check the toubleshooting section for ideas. Do this for trigger (sometimes called button 1), start, coins, any anything else how you want your settings done. For your light gun pointer - crosshairs on will probably help (I leave mine on all the time anyway since I'm not worried about competitive playing). To set crosshairs - hit enter on X analogue and Y analogue and move your wiimote swiftly in the X and Y directions (for Y point wiimote up/down, X side to side after hitting enter). Back out of menu and test by inserting coin and hitting start - you should be able to play in mameuifx at this point after calibration of the machine. Setting Up Mame/LB Add your light gun emulator mame64.exe (if you made a new one) to your usable emulators, import your light gun games to launch box. Set use emulator pointing to the new mame64.exe with launchbox for these games. With luck - the config files in that folder will already be set and you're good to go. To play - open Touchmote and set controller and select your game! First Play You'll need to calibrate your gun - this is a little trial and error. TAB and set dip switch to service mode (depends on game) Navigate to gun calibration (most games have you use a combination of p1 and p2 start and triggers) you may need to use your actual mouse first time around to select calibration on the screen) Follow on screen prompts (shoot at dots). Have Fun! - You should now have 2 player light guns working with mame using 2 wiimotes and a dolphinbar! Troubleshooting On first run - if your guns don't work opening from launchbox - try setting them inside mame opened from launchbox following the steps 4-8 under setting controls - this is hit or miss on the x and y axis', I've only ever been able to set the mouse pointer axis to set under mameuifx64. Make sure in the "gamename.ini" file there are 1s next to the control settings you set under mame basic setup above. 1 is a ticked box 0 is unticked in the ini files) - its an ugly way to do it but it works. If you can't set controls for x and y axis' - you might have to run though mameuifx again - sometimes the game.ini and game.cfg files won't stick - haven't figured out why yet. Check these files in your mame directory with notepad++ to see if configurations have changed. Again - the mouse on controller 1 is usually the one that gives issues. Also try opening mame64.exe directly and setting things if the above doesn't work (rather than opening though launchbox - this will give you the ability to use your esc key if you didn't bind one. If you can get stick working but not mouse (e.g. gun 1 doesn't work but 2 does) - it is a mame issue - check to make sure lightgun is set as lightgun in game ini or mameuifx. Try resetting your PC, reconnect controllers and play around - it does work but takes some fussing at times. Known Issues: Stick sensitivity for gun 2 leaves room to be desired- but Touchmote seems like a dead project at this point so I doubt they'll add an adjustment feature. To shoot off screen to reload - you may need to hit the edge of your screen (if crosshairs are on it becomes apparent what I mean) and mash fire. You get use to it after a little play and it's not that big of a deal. You may get it working and it just STOPS one day. Most likely its due to xinput slot changes. Rebind controls and move on. It sucks - but its part of life until someone can figure out how to assign device id to slot and prevent the system level changes. While this isn't an "aimtrack" setup - its cheap, dirty, and fun for the casual. I have my wiimotes in some no name handgun zappers and have also set up Supermodel for JP with this - lots of fun after some frustration. I hope this write-up, if not perfect - will at least get anyone who wants to try in the right dirrection. There wasn't much documentation on how to do this, but trial and error got me to a working setup. I have another thread open for some issues with using multiple controllers like this if anyone has advise on it - with regard to how xinput handles controllers after reset or plugging/unplugging.
Hello all, Just spent a couple days setting up LB/BB and I think I have found an obscure yet annoying bug. I am using a genuine Wii bluetooth module wired up to usb and connected using dolphins bluetooth passsthrough feature (more info here). The module allows basically perfect Wiimote behavior, no dropped connections or "re-syncing" required. My ideal set up is using an 8bitdo Xinput controller to navigate and launch, (as well as play Gamecube games) then pick up a Wiimote to play Wii games. When it is time to quit or switch games i use the Xinput controller to close the active window. The problem is when using Launchbox or BigBox, if i try to quit a game using the "Close active window" controller mapped button it kills the bluetooth, and it does such a number on it that reinstalling the libusbk driver is required to get it working again. One thing to note is that hitting ESC on the keyboard or using the mouse to "X" out the window does not kill the bluetooth, it only happens when using the controller to close the active window. So is "Close the active window" essentially mapped to Alt+F4? Anyway to change that to ESC? Any reason to not do that? I bought Bigbox mostly for playing Wii games and it is quite annoying to have another peripheral on the couch with me (Controller, Wiimote, and now wireless keyboard to hit ESC) so hopefully there is an easy fix. Thanks in advance.
Hi guys, I have just watched the tutorial on how to play Game Cube and Wii games on LaunchBox and what I don't get is the way to layout the xbox 360 controller. I have done it as in the video but I suspect maybe when selecting "classic" instead of nunchuk you go under a sub-setup, not the main layout on the controller section? I have attached a couple of pics showing my configuration. Hope you guys can help Many thanks in advance!
I was wondering if there is a way to add a place for controls/controller icons. Purpose/example: In my DOS collection there are some games i am able to play with a controller/joystick and others I am able to play with Keyboard and Mouse. It would be cool to see an Icon of say a controller (allow different controller icons to be selected such as PS4 or XBOX360/ONE Controller) or a Keyboard/Keyboard Mouse. This would also be beneficial for Wii Games since they use various controllers and controller addons this would help to quickly see what controller would need/supported to be used (such as the wiimote, nunchuck, pro controller...) Icon Ideas: Xbox 360/one, PS4, Wiimote, wii nunchuck, Wii pro controller, arcade stick, nes, snes, keyboard, mouse, KB/Mouse, joystick What do you think? REQUEST Link: https://bitbucket.org/jasondavidcarr/launchbox/issues/2603/controls-icons