Jump to content
LaunchBox Community Forums

Sega Model 3 Controls Configuration setup


Recommended Posts

Hello Everyone!

So after reading a bunch of help files and posts, I decide to make one that is hopefully super easy and understandable for noobs (barely understand CMD commands.) like myself when it comes to setting up the Sega Model 3 controls.  This worked for me, so hopefully it also works for you.

Here we go:

  1. After downloading the Sega model 3 emulator and unzipping it into your emulators folder, right click and make sure it runs as ADMINISTRATOR
  2. Go to your Start button, press it and type in the search bar "CMD", then right click on the result and "Run as Administrator"
  3. You should get a screen that is a DOS PROMPT
  4. Open the folder window where your emulator is located at and click in the bar to show the location of the folder.  My folder is E:.  Right Click and Copysm3.png.df750252001f86c99cefcc3e0bd12de1.png
  5. Go to your CMD window and "right click and PASTE"
  6. You should now be in the drive and folder where your emulator is located at.  If not, To access another drive, type that drive’s letter, followed by “:”. For instance, if you wanted to change the drive from “C:” to “D:”, you should type “d:” and then press Enter on your keyboard.
  7. Once you are in the drive your CMD prompt should be pointing to the folder that your emulator is at.
  8. type in this at the prompt:               supermodel -config-inputs
  9. It will then give you a SECOND DOS window that is blank, DO NOT CLOSE THIS WINDOW, just move it to the side
  10. Click back on the original window to make sure FOCUS is on that one.
  11. Press Enter to activate mapping and you will see the word SETTING pop up.  Now press the key you want to map to each control question.sm2.png.3657e7c1cfda333dd9d615a24af4eddf.png
  12. Follow through each one and you can always press ESC to cancel the selection and try again.
  13. When you are done.  PRESS q

Your done!  Enjoy Sega Model 3!



Edited by latin625
Link to comment
Share on other sites

I tried to go to the links that you sent the url to but all of them are full of popups and redirections.

Others may want to try this: https://www.mediafire.com/file/ru8a3zuffw63rfo/Supermodel-r715+Release.zip

Just configure it with the same instructions.  works like a charm.  Thanks for the updated emulator info.

Edited by latin625
Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...