I-PAC2 Command line changing configuration Issue

[danielsan27]

Hi there,

posting a new topic cause i'm difficult to submit a reply on old post.

So, i did two .ipc configuration files (one for keyboard mode 1, one for Xinput mode on mode 5 (this last contains an HOME pad key)

From keyboard mode 1, using the changing configuration via command line  ------> "winipac ipacpad.ipc" it works perfectly, it switches to Xinput mode !!

ISSUE: from this mode i want to return to previous keyboar mode so i do: "winipac ipackeyb.ipc"  BUT DOESN'T NOTHING!!!

On old post someone wrote had the same issue.

How can it possible to switch form Xinput to Keyboard mode??

Ty on advance

Edited October 30 by danielsan27

[danielsan27]

SOLVED!

Talking with Andy (official IPAC reseller) he told me that every IPC configuration file must be set with all keys or all pad buttons, no mixed.

Did a rapid check: IPC pad file was ok, all pins was set to pad buttons (also unused pins), no key. ------------> IPC keyb file had a pad button on a unused pin <---------------, so , when i tried to change from mode xinput to mode keyb via IPC file, didin't work for this reason

Corrected IPC keyboard file, editing the unused pin, correctly set to a key button (not important which, because it was an unused pin) and then it WORKS !

Now, next step is, doing a script, but for this, i will open another topic

Edited October 31 by danielsan27