ArcadeAlexa Posted October 3 Posted October 3 Hello, i finished now to building my Arcade CASE. Wiring all, and installed Windows 11. So, i have an old 12TB Hypersin HDD. How is now the best way to get all the Games to LaunchBox? What is the best way, to sort out the REAL FOLDERS with the right Games in it ? I never run the old HyperSpin HDD. Have somebody som,e Tips, what is the best way, to make from the complete 12TB a REAL HDD to hold all the Games and coming Covers, Marquees and so on for all the Games on the 12TB. Many Thanks to bring ideas to me. I buy Lounchbox for over 1 Year. And now i installed it in V14.0.1 Thanks Quote
NNEMO Posted October 21 Posted October 21 I recommend you use Claude AI and tell it the info of where you have you launchbox folder C:, . installed and tell it what drive your 12tb hyperspin is example: G:, then tell it to help you setup launchbox to launch the games from that drive. Note: the more details you give it about your computer setup, the better. I asked it a similar question and this is what is said. The main idea: keep LaunchBox itself on your SSD, point it at the games on the 12TB drive, and tell it to leave the files where they are. **1. Lock the drive letter first** In Windows Disk Management, right-click the 12TB drive, choose "Change Drive Letter," and pick something fixed like **G:**. LaunchBox saves full paths to anything outside its own folder, so if the letter changes later, every game breaks. **2. Look at what's on the drive** Most of these prebuilt drives use the same layout: an `Emulators` folder, a `Roms` folder split by system, and sometimes a complete LaunchBox or HyperSpin setup already on it. Note the paths. You'll be pointing at those emulators and ROM folders rather than copying them. **3. Install LaunchBox on the SSD** Install it fresh on the SSD. Media (box art, videos) and the database load much faster from an SSD, and BigBox will feel snappier. **4. Import each system** - **Consoles:** Go to Tools → Import → ROM Files and pick a system's folder on G:. Choose the platform and the emulator, using the emulator already on the drive. When it asks what to do with the files, choose **"Leave them where they are."** Let it pull metadata and media from the LaunchBox Games Database. - **MAME:** Use Tools → Import → **MAME Full Set**. The romset has to match your MAME version. If the drive's set is older than the newest MAME, use the MAME build that came on the drive for that set. - **PC games:** Use Tools → Import → Windows/DOS games and point it at each executable. **5. Pace the scraping** Downloading media for a whole 12TB library can take hours and fill up your SSD. Start with images only (box front, screenshots, clear logos) and add videos for your favorite systems later. **6. Test, then set up BigBox** Launch one or two games per system. When one fails, the cause is usually the emulator path or a missing BIOS file, which belongs in that emulator's `bios`/`system` folder. Once everything launches, go to BigBox options to set controller mappings and autostart for the cabinet. A shortcut: if the drive already includes a configured LaunchBox folder, try running that `LaunchBox.exe` directly from G: first. It may already be fully set up, and you can keep your fresh install for just the systems you want. Quote
ArcadeAlexa Posted November 9 Author Posted November 9 On 10/21/2026 at 8:07 PM, NNEMO said: I recommend you use Claude AI and tell it the info of where you have you launchbox folder C:, . installed and tell it what drive your 12tb hyperspin is example: G:, then tell it to help you setup launchbox to launch the games from that drive. Note: the more details you give it about your computer setup, the better. I asked it a similar question and this is what is said. The main idea: keep LaunchBox itself on your SSD, point it at the games on the 12TB drive, and tell it to leave the files where they are. ........ A shortcut: if the drive already includes a configured LaunchBox folder, try running that `LaunchBox.exe` directly from G: first. It may already be fully set up, and you can keep your fresh install for just the systems you want. Many, many THANKS !!! I think your Ways working. Not so easy, to grab all files, that the emulators all need. Is there a Emulator Pack to grab all Files "in one way" ? Quote
NNEMO Posted November 14 Posted November 14 On 11/9/2026 at 11:31 AM, ArcadeAlexa said: Many, many THANKS !!! I think your Ways working. Not so easy, to grab all files, that the emulators all need. Is there a Emulator Pack to grab all Files "in one way" ? If you noticed that some games dont load, its probably missing a bios. Just a heads up its going to take some work, Sega Saturn, Sega CD and Dreamcast are probably the hardest to get working correctly. The files you need are probably already on that 12TB drive with weird filenames, cross reference the list below. If only there was some sort of Internet Archive that had these files. Patience is key, also have good anti virus. Here is what claude AI says. There’s no single download that has everything, because emulators and BIOS files are two different things: 1. Emulators: RetroArch is about as close to “one pack” as it gets RetroArch is one program that runs most systems through “cores” (NES, SNES, Genesis, N64, PS1, GBA, Saturn, arcade and more). You install it once, then download cores from inside the program: Open RetroArch and go to Main Menu → Online Updater → Core Downloader. Pick the cores for the systems you want. In LaunchBox, add RetroArch once as an emulator and choose the core for each platform. LaunchBox also has a built-in setup for RetroArch that makes this part easier. You’ll still want separate emulators for a few systems: MAME (use the version that matches your romset), PCSX2 (PS2), Dolphin (GameCube/Wii) and Cemu (Wii U). Your HyperSpin drive probably already has these in the Emulators folder. 2. BIOS files: probably already on your drive Start with your own drive. HyperSpin drives usually include BIOS files. Search the 12TB drive for folders named bios or system, or for file names like scph (PlayStation). Copy them into RetroArch’s system folder. Let RetroArch tell you what’s missing. Go to Main Menu → Information → Core Information on a loaded core. It lists the BIOS files that core needs and whether each one is “Present” or “Missing.” Many systems don’t need a BIOS at all. NES, SNES, Genesis, N64 and most arcade games just work. The usual ones that need BIOS files are PS1, PS2, Sega CD, Saturn, PC Engine CD and Dreamcast. For Neo Geo in MAME, neogeo.zip goes in your ROMs folder. I can’t point you to a “BIOS pack” download. Those files are copyrighted, and the legal way to get them is to dump them from consoles you own. But between your drive and RetroArch’s “Missing” list, you should be able to find and fill the gaps. Search in google for what you need. Where they go: Most of these go in RetroArch’s system folder (normally RetroArch\system\). The exceptions are noted below. Sony PlayStation (PS1) scph5501.bin (USA), scph5500.bin (Japan), scph5502.bin (Europe) scph1001.bin also works with some cores Sony PlayStation 2 (PCSX2) There’s no fixed file name. Search for files starting with SCPH (for example SCPH-39001, SCPH-70012), usually .bin files with matching .nvm/.mec files next to them These go in PCSX2’s own bios folder, not RetroArch’s Sega CD / Mega CD bios_CD_U.bin (USA), bios_CD_E.bin (Europe), bios_CD_J.bin (Japan) Sega Saturn mpr-17933.bin (USA/Europe), sega_101.bin (Japan). These are for the Beetle Saturn core. saturn_bios.bin is for the Yabause and Kronos cores Sega Dreamcast (Flycast) dc_boot.bin (required), dc_flash.bin These go in a dc subfolder: RetroArch\system\dc\ PC Engine CD / TurboGrafx-CD syscard3.pce (the main one; syscard1.pce and syscard2.pce are older versions) Neo Geo (arcade) neogeo.zip. This goes in your Neo Geo / MAME ROMs folder, not the system folder. Other arcade BIOS (MAME/FBNeo, these also go in the ROMs folder) naomi.zip (Sega NAOMI), awbios.zip (Atomiswave), pgm.zip (IGS PGM), qsound.zip (only some older MAME sets need this one) Panasonic 3DO panafz10.bin (most compatible), also panafz1.bin or goldstar.bin Famicom Disk System disksys.rom Atari Atari 5200: 5200.rom Atari 7800: 7800 BIOS (U).rom (optional) Atari Lynx: lynxboot.img ColecoVision colecovision.rom Intellivision exec.bin, grom.bin Amiga (PUAE core) kick34005.A500 (Amiga 500), kick40068.A1200 (Amiga 1200) Original Xbox (Xemu) mcpx_1.0.bin, Complex_4627.bin (plus an Xbox hard drive image) Optional (most games run without them) Game Boy Advance: gba_bios.bin Nintendo DS (melonDS): bios7.bin, bios9.bin, firmware.bin Game Boy / Color: gb_bios.bin, gbc_bios.bin No BIOS needed: NES, SNES, N64, Genesis/Mega Drive, Master System, Game Gear, GameCube/Wii (Dolphin), PSP (PPSSPP). Tip: After copying the files, open RetroArch, load a core, and go to Information → Core Information. It shows whether each BIOS is “Present” or “Missing.” RetroArch also checks that each file is the correct version (by checksum), not just that the name matches. The Saturn and Dreamcast entries cause the most trouble. Saturn names depend on which core they use, and the Dreamcast files have to go in the dc subfolder, so it’s worth telling them to double-check those two. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.