-
Posts
618 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Downloads
Gallery
Blogs
Posts posted by johnnyskullhead
-
-
12 hours ago, JoeViking245 said:
Can you provide a screenshot of your Emulator Details and Associated Platforms? Something like:
I don't use it myself, but it looks very basic and my guess would be that the issue in the Associated Platforms section. The main thing is to make sure the name and spelling of the Associated Platform is exactly the same as the one you're trying to launch in.
screenshots courtesy of:
Will Thank You
-
Hi Sorry
hope this is not being discussed in another post cannot get Standalone Mednafen to run within Launchbox
Its Mednafen version 1.27.1
Runs fine if i place rom manually on exe outside Launchbox, but does nothing within Launchbox
Any help would be appreciated
Thanks
Dean
-
17 hours ago, neil9000 said:
Head to Tools/Options/Updates and check the box for beta's, then head to the hamburger menu/Help/Check for updates.
Thanks Much Appreciated
-
13 hours ago, neil9000 said:
This has already been thoroughly discussed in another thread, and is already fixed in the current beta, if you want to update to that. Otherwise you will need to wait until the next official release, that has no current ETA. The issue is when using to two different emulators with the same platform.
Thanks Mate, never updated to Beta , how do you do that ?
-
Hi
Trying to add associated platform in retroarch keep getting error message
The same command-line parameters are used more than once for the Final Burn Alpha within this emulator. Please select distinct command-line parameters for each entry.
Please advise
-
Hi
Would appreciate some assistance
Does anyone know How to set Scan Lines on Mame Games with Multiple Screens
Games like Darius have the first screen with Scan Lines but other two are standard
Thanks in Advance
Dean
-
Hi hope someone can help
as importing FBA games and while it was importing screen just started to zoom in
I have tried to zoom out with CTRL and - nothing happens when i revert to Bigbox its fine i have turned off pc quit etc no joy any ideas
I hope i havent got to start from scratch as i have imported quite a few systems already
Any Help would be appreiciated
BTW is there alist of keyboard commands ?
Can't seem to get any keys to work
-
Hi
I am hoping someone can help, my previous emu pc died so i had to replace
all drives ok and Launchbox 11.9 was stored on an external drive but it wont boot
crashes everytime i try
i have an older version 9.on another drive but when i try to run that it says i must download Net framework 4.7 but then says it not compatible with my pc
I am running windows 10 up to pc dying running ok
Any Ideas
Dean
-
Hi I know this really is probably not the right place to ask but i have always had great help here so I am hoping someone can help
My Ipac2 suddenly has stoppped working
Booted up this morning and was controlling fine, then it stopped working all buttons and sticks changed usb lead no change
even tried plugging into Raspberry Pie via retropie again it recognised it but wont acknowledge button presses
Any ideas would be appreciated
Thanks In advance
Dean
-
Sound and Music issues Pc Engine cd running on Beetle Pce Fast
all games run fine but somehave both cd sound and console generated but not all some only have console generated sound and some have no music but some speech !
Rondo of blood is fine Us Version of Lords of Thunder is fine but jap no music
any ideas
Thanks
-
On 4/28/2020 at 6:45 PM, Jayinem said:
I don't have an Aimtrak I have EMS Top Gun 3 but the way I do it with it (I assume the same with Aimtrak) is just start a mame game and hit tab you can choose general settings which will effect all mame games or the one below it which is game specific then go to the button you want to change hit enter and press the button on your gun and it should register and save in Mame permanently. If it's not working that way I can't help though because again I don't have Aimtrak.
Dreamcast you have a few options I heard Redream just got lightgun support but I've never used it so can't give you advice I know it only supports Dreamcast while Demul supports Dreamcast and many Sega arcade games and some of those works with Lightguns Naomi, Naomi 2, Atomiswave and Hikaru so Demul is probably your best bet unless you have no interest in those arcade games but some of them are awesome. You have to make sure you have the right bios and some games need chds to work sorta like Mame.
There's also Flycast I use the standalone and it's probably the easiest to setup lightgun games most of them just work by changing settings to Lightgun no calibration needed. But you have to find the Flycast standalone. But Demul has more support for more arcade types Flycast is only Dreamcast and some Naomi and some Atomiswave so compatibility wise Demul wins.
Many Thanks
-
Hi all
sorry to post but was wondering if any one can help setting up Aimtrack gun with Mame and other emus
Struggling to get additional buttons to work in mame especially Time crisis
also does redream work with Guns or do i need to set up Demul for Dreamcast ?
Thanks again
-
Hiya Mate
changed to xinput which sorted it
Thnaks for help
- 1
-
5 hours ago, JoeViking245 said:
What do you mean by "can't get the games to run"? Are you meaning launch (start) a game from LaunchBox by pressing a button? When you use the keyboard to launch/start a game, I assume it's by pressing the Enter key.
Unless you reconfigured the IPAC to be seen as an XInput device, you won't be able to map it as a "controller" in LaunchBox. By default, the IPAC is seen as a keyboard (as opposed to an XInput or DInput device).
The joystick works because it's (usually) always seen as Up/Down/Left/Right keys.
Hi Mate
Thanks for reply
Yes they will not Launch via Button input on Controller , but will run fine via Mouse or keyboard input
Games control fine in Emulators
So would you recommend going X-Input ?
I did try setting it ti X-Input but could not get it to change , do you know button press sequence ?
Thanks
Dean
-
Hi Sorry to ask
Just made Controller with 2 sticks and 6 button setup controlled via ipac 2 downloaded latest firmware
got Mame and Retroarch working fine with sticks n buttons but i cannot get games to run via buttons on controller
i can navigate Launchbox main screen and change game with sticks but when i press buttons nothing
i tried to remap buttons but it wont recognise any buttons presses
works fine with mouse or keyboard
any help would be appreciated
-
Hi Sorry to ask
got Mame and Retroarch working fine with sticks n buttons but i cannot get games to run via buttons on controller
i can navigate with sticks but when i press buttons nothing
i tried to remap buttons but it wont recognise any buttons presses
any help wouls be appreciated
-
On 4/17/2020 at 2:39 PM, JoeViking245 said:
To work in LaunchBox, you shouldn't need to have it in Xinput mode. That said, I didn't realize this was even possible....
https://www.ultimarc.com/control-interfaces/i-pacs/i-pac2/
Click on the Multi-Mode tab. If your I-PAC2 has firmware version 50, you can easily switch it between Keyboard/Dinput/Xinput modes.
Thanks
- 1
-
Hi Sorry
this may be the wrong forum but need help please
Trying to sort ipac 2 with Launchbox
How to set up Ipac 2 to Xinput assuming that the best way to go
Please help
Thanks
-
Will try Ta
-
Retro808 seems to have cracked it
Many Thanks Matey
-
Thanks will try it
-
also tried on my AMD 2700x with 32 gb ram same thing super high cpu usage
which did not happen before
-
Just started running Latest version of Launchbox for pc and it appears broken
everytime i run its burning cpu 90% + just displaying 14 game boxes WTF my fan is going to take off please advise
earlier versions worked fine
im running windows 10 with a amd 8350 16gb ram
Please help
-
Whats your thoughts on Mame in Retroarch
Standalone Mednafen will not run within Launchbox
in Emulation
Posted
Hi
I am using latest vesion, not chds, bin and cue files
Works fine if i manually drop files onto .exe
does there need to be something in command line parameters?
Thanks Again