Jocusenz Posted December 13, 2020 Share Posted December 13, 2020 Hi everyone, very new to the community and LaunchBox as well. So, I've noticed that when I try to play specifically Ocean Hunter and L.A. Machineguns, that the display is at fullscreen is way too far to the right, cutting off about 4 inches. I've been trying different methods to fix this, and spent hours on it, but nothing seems to work. Now, my controls for my mouse, which worked at one point, no longer work in either game. I've attached my .ini settings. Any help is appreciated. Supermodel.ini.bak Supermodel.ini.bak Quote Link to comment Share on other sites More sharing options...
JoeViking245 Posted December 13, 2020 Share Posted December 13, 2020 @Jocusenz If it's running full screen it should 'fit' to the screen. But you can set a custom resolution per game in your ini file. Example: ; Start Wars Trilogy [ swtrilgy ] XResolution = 800 YResolution = 600 line comment rom_name (include the brackets) X resolution Y resolution 10 hours ago, Jocusenz said: controls for my mouse, which worked at one point, no longer work in either game. In your ini file go to the "Analog guns (Ocean Hunter....)" section. On the InputAnalogGunX(Y) lines remove reference to the JOY1 axis'. ; Analog guns (Ocean Hunter, LA Machineguns) ;InputAnalogGunX = "MOUSE_XAXIS,JOY1_XAXIS" ; analog, full X axis **ORIGINAL ;InputAnalogGunY = "MOUSE_YAXIS,JOY1_YAXIS" ; analog, full Y axis **ORIGINAL InputAnalogGunX = "MOUSE_XAXIS" ; analog, full X axis **REVISED InputAnalogGunY = "MOUSE_YAXIS" ; analog, full Y axis **REVISED 1 Quote Link to comment Share on other sites More sharing options...
Jocusenz Posted December 13, 2020 Author Share Posted December 13, 2020 Got it, I’ll give it a shot when I get home. When I run it on my monitor it adjusts perfectly, but I’ve moved it to our 85 inch screen so that my 7 year old can play Ocean Hunter, he loves that game. Thanks! Quote Link to comment Share on other sites More sharing options...
Cineaste Posted January 19, 2023 Share Posted January 19, 2023 On 12/14/2020 at 1:12 AM, JoeViking245 said: @Jocusenz If it's running full screen it should 'fit' to the screen. But you can set a custom resolution per game in your ini file. Example: ; Start Wars Trilogy [ swtrilgy ] XResolution = 800 YResolution = 600 line comment rom_name (include the brackets) X resolution Y resolution In your ini file go to the "Analog guns (Ocean Hunter....)" section. On the InputAnalogGunX(Y) lines remove reference to the JOY1 axis'. ; Analog guns (Ocean Hunter, LA Machineguns) ;InputAnalogGunX = "MOUSE_XAXIS,JOY1_XAXIS" ; analog, full X axis **ORIGINAL ;InputAnalogGunY = "MOUSE_YAXIS,JOY1_YAXIS" ; analog, full Y axis **ORIGINAL InputAnalogGunX = "MOUSE_XAXIS" ; analog, full X axis **REVISED InputAnalogGunY = "MOUSE_YAXIS" ; analog, full Y axis **REVISED Necro bump but I have similar control issues. Are yours still working? Even with the revised .ini lines I cannot move the cross-hairs in-game for LA Machineguns. Quote Link to comment Share on other sites More sharing options...
JoeViking245 Posted January 19, 2023 Share Posted January 19, 2023 3 hours ago, Thornback said: Necro bump but I have similar control issues. Are yours still working? Even with the revised .ini lines I cannot move the cross-hairs in-game for LA Machineguns. I only use my Xbox 360 controller for this. But testing this AM to get the mouse to work was a big failure. (though I didn't really spend too much time on it) So I went to plan "B" (which should probably be the new plan "A". ). Download Warped Polygon's file(s). Copy lamachin.nv into your nvram folder (overwrite the existing file THAT YOU 1st MADE A BACKUP OF). Copy (and replace) the section from supermodel.ini (located in Supermodel XINPUT INI File.zip) for Analog guns into your supermodel.ini Or just backup your existing supermodel.ini and copy the whole file into your Config folder. Quote Link to comment Share on other sites More sharing options...
Cineaste Posted January 19, 2023 Share Posted January 19, 2023 6 hours ago, JoeViking245 said: I only use my Xbox 360 controller for this. But testing this AM to get the mouse to work was a big failure. (though I didn't really spend too much time on it) So I went to plan "B" (which should probably be the new plan "A". ). Download Warped Polygon's file(s). Copy lamachin.nv into your nvram folder (overwrite the existing file THAT YOU 1st MADE A BACKUP OF). Copy (and replace) the section from supermodel.ini (located in Supermodel XINPUT INI File.zip) for Analog guns into your supermodel.ini Or just backup your existing supermodel.ini and copy the whole file into your Config folder. Interestingly, his files cause all of my games to become unresponsive, when before it was only the Analog Gun titles. Reverting to defaults works as intended, except L.A. Machineguns. I appreciate your assistance though! Quote Link to comment Share on other sites More sharing options...
fugeeman74 Posted January 25 Share Posted January 25 How do you get a 360 controller dpad or analog stick to work for LA Machine guns? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.