marcosgaming Posted 12 hours ago Posted 12 hours ago Hi everyone, I've recently updated Supermodel to the latest version. Good news on the lightgun side: I’ve built a dedicated setup that works flawlessly, including force feedback/outputs where supported. However, I'm struggling quite a bit with the Supermodel.ini configuration for standard games: Driving games: They play amazingly with an Xbox 360 controller, but steering/handling is terrible when using an arcade cabinet control panel. Virtua Striker & 2-Player keyboard/arcade setup: I have a 2-player Ultimarc Ultimate I/O setup, meaning the keyboard handles controls for both players. I suspect this dual-player keyboard mapping is conflicting with Supermodel's input management, causing major issues with directional inputs and conflicts. My ultimate goal is to have a 100% working Supermodel.ini where both two Xbox 360 controllers AND a dual-player arcade cabinet/keyboard can coexist smoothly without breaking each other's inputs. Is this actually possible, or is it an impossible mission? If anyone has a working config file for a similar dual-setup (arcade cab + Xbox pads) or some advice, I'd really appreciate it if you could share it. Thanks in advance! Quote
JoeViking245 Posted 7 hours ago Posted 7 hours ago 4 hours ago, marcosgaming said: Driving games: They play amazingly with an Xbox 360 controller, but steering/handling is terrible when using an arcade cabinet control panel. With the controller, the steering is variable along the Y axis. You can turn left a little or a lot (or anywhere inbetween). Where-as a joystick is a go/no-go situation. It either has the wheel centered, cranked all the way to the left or all the way to the right. You can't just turn slightly. 4 hours ago, marcosgaming said: My ultimate goal is to have a 100% working Supermodel.ini where both two Xbox 360 controllers AND a dual-player arcade cabinet/keyboard can coexist smoothly without breaking each other's inputs. Is this actually possible, or is it an impossible mission? If anyone has a working config file for a similar dual-setup (arcade cab + Xbox pads) or some advice, I'd really appreciate it if you could share it. Here's an example setup that makes use of a 2-player cab (with the encoder set to keyboard mode) and 2 controllers ; 4-way digital joysticks InputJoyUp = "KEY_UP,JOY1_UP" InputJoyDown = "KEY_DOWN,JOY1_DOWN" InputJoyLeft = "KEY_LEFT,JOY1_LEFT" InputJoyRight = "KEY_RIGHT,JOY1_RIGHT" InputJoyUp2 = "KEY_R,JOY2_UP" InputJoyDown2 = "KEY_F,JOY2_DOWN" InputJoyLeft2 = "KEY_D,JOY2_LEFT" InputJoyRight2 = "KEY_G,JOY2_RIGHT" Player 1 joystick is mapped to up/down/left/right Player 2 joystick is mapped to R/F/D/G Controller 1 (Joy1) & 2 (Joy2) are mapped to their respective up/down/left/right Now if your encoder is set to Xinput mode, that's a different story. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.