Jump to content
LaunchBox Community Forums

Supermodel Emulator (dual-player arcade cabinet (keyboard/controllerXbox360)


Recommended Posts

Posted

Hi everyone,

I've recently updated Supermodel to the latest version. Good news on the lightgun side: I’ve built a dedicated setup that works flawlessly, including force feedback/outputs where supported.

However, I'm struggling quite a bit with the Supermodel.ini configuration for standard games:

  1. Driving games: They play amazingly with an Xbox 360 controller, but steering/handling is terrible when using an arcade cabinet control panel.
  2. Virtua Striker & 2-Player keyboard/arcade setup: I have a 2-player Ultimarc Ultimate I/O setup, meaning the keyboard handles controls for both players. I suspect this dual-player keyboard mapping is conflicting with Supermodel's input management, causing major issues with directional inputs and conflicts.

My ultimate goal is to have a 100% working Supermodel.ini where both two Xbox 360 controllers AND a dual-player arcade cabinet/keyboard can coexist smoothly without breaking each other's inputs.

Is this actually possible, or is it an impossible mission? If anyone has a working config file for a similar dual-setup (arcade cab + Xbox pads) or some advice, I'd really appreciate it if you could share it.

Thanks in advance!

Posted
4 hours ago, marcosgaming said:

Driving games: They play amazingly with an Xbox 360 controller, but steering/handling is terrible when using an arcade cabinet control panel.

With the controller, the steering is variable along the Y axis. You can turn left a little or a lot (or anywhere inbetween).

Where-as a joystick is a go/no-go situation.  It either has the wheel centered, cranked all the way to the left or all the way to the right. You can't just turn slightly.

4 hours ago, marcosgaming said:

My ultimate goal is to have a 100% working Supermodel.ini where both two Xbox 360 controllers AND a dual-player arcade cabinet/keyboard can coexist smoothly without breaking each other's inputs.

Is this actually possible, or is it an impossible mission? If anyone has a working config file for a similar dual-setup (arcade cab + Xbox pads) or some advice, I'd really appreciate it if you could share it.

Here's an example setup that makes use of a 2-player cab (with the encoder set to keyboard mode) and 2 controllers

; 4-way digital joysticks
InputJoyUp = "KEY_UP,JOY1_UP"
InputJoyDown = "KEY_DOWN,JOY1_DOWN"
InputJoyLeft = "KEY_LEFT,JOY1_LEFT"
InputJoyRight = "KEY_RIGHT,JOY1_RIGHT"
InputJoyUp2 = "KEY_R,JOY2_UP"
InputJoyDown2 = "KEY_F,JOY2_DOWN"
InputJoyLeft2 = "KEY_D,JOY2_LEFT"
InputJoyRight2 = "KEY_G,JOY2_RIGHT"

Player 1 joystick is mapped to up/down/left/right
Player 2 joystick is mapped to R/F/D/G

Controller 1 (Joy1) & 2 (Joy2) are mapped to their respective up/down/left/right

 

Now if your encoder is set to Xinput mode, that's a different story.

Posted

Thanks for answer,

Yes i know the config.

I think that difference here Is in input mode...

What input to use in my situation?

I would a system portable that knows 2 controllers id automatically and play with keyboard (Ultimarc ultimate i/o) with 2 players at same time.

Posted
4 hours ago, marcosgaming said:

I think that difference here Is in input mode...

What input to use in my situation?

If you set your encoder to Xinput mode and plug in 2 Xbox controllers, Supermodel will see 4 controllers. Joy1, Joy2, Joy3 and Joy4.  Which order it sees them in, no idea. But you'll always have 4 players (4 active controllers).

I suppose you could set it up in the ini to cover the other 2.  e.g.:
InputJoyUp = "KEY_UP,JOY1_UP,JOY3_UP"
InputJoyUp2 = "KEY_R,JOY2_UP,JOY4_UP"

This seems it should cover whether your encoder is in Xinput or Keyboard mode.

 

The easiest way may be to set the encoder to whichever mode is easiest for you and best compatible across the board for all your emulators.

Plugin in and turn on the 2 Xbox controllers and start SuperModel. Go into the Key Bindings tab and set them up from there.

 

image.thumb.png.39a5a8c3c9c41cc7e3fa2531e750abc1.png

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...