Jump to content

Recommended Posts

Posted (edited)

Hi Everyone, I wasn't sure if it was ok to post this here, mods please let me know and I can move or remove as required.

I started two small personal projects that are now live. With help from Claude and building off what a few other apps have started in the market, I built a virtual controller program (which builds on what UCR started, consider it a spiritual successor called UCR-Next) with a bunch of new features. It imports profiles from UCR v090 (or builds profiles from scratch) and can act as a stand in replacement (at the user's discretion) if you install it to a folder with the same name.UCR-Next github

The second item is LED-Next, a modern Windows replacement for LED Blinky. It drives arcade button led and animations. It has better performance, switching between games in LaunchBox displays the LED buttons as fast as 3 milliseconds. It's stable and won't leave lights on if the app encounters a problem. It runs in the background and can import your LED Blinky data, building on it with a new database. You can find it here: LED-Next github

Pics are on the github links above

Both are based on my current arcade setup, launchbox frontend, and ultimarc led Pac64 controller boards. LED-Next comes with a launchbox plugin so when using either Launchbox or Bigbox the switching works as you would expect. The two apps can also share some data. Both apps are free and have many new features; please see their respective GitHub pages. I will continue developing both, adding new features and support for different frontend software, etc. So far I’m using both with my setup and they are working well. I hope others find them useful and suggest some new features you may want to see.


Thanks!

Edited by QuincyR
  • Like 1
  • QuincyR changed the title to A few new apps for launchbox users UCR-Next & LED-Next
Posted

it doesn't at the moment, though it does have button naming included. I was debating if I should include that feature. i had it enabled for LED blinky and sorta liked it for a while before I started skipping the audio.

My next focus is to get output from all the different emulators working to animate the lamps. The current build works with mame lamp output if you have it enabled.  

Posted

version 0.1.1 is up. Changes:
- It can speak your game name and button names ( some extra controls under the speech tab)
- improved the output lamp handling ( 1st step towards allowing the end user to create custom lamp animations & triggers) 

  • Like 1
Posted (edited)

Today brought v0.1.5 and v0.1.6:

  • Lamps from Keisho, Odin, Supermodel and TeknoParrot now work
  • Crazy Taxi and about 380 other arcade games get their buttons from MAME ( if they don't already exists)
  • The installer finds LaunchBox on any drive.
Edited by QuincyR
  • Like 1
Posted

version 0.1.7:

  • New Animations tab (idle animation, follow the sound, start-up and shut-down shows) 
  • Lamps tab: are now being recorded to database when playing games ( creating custom lamps will be the next feature )
  • Like 1
Posted (edited)

new version will be coming in an hour or two. I've made some small changes to help recover from write errors on the LED's. Expect the following on LED-Next 0.1.8:

- Recover from write errors during animations ( it causes flickering LED's)
- Animation speed slider ( 1.0 is default higher is faster, lower is slower )
- Small color picker next to the default color options ( gives more choices )
- A few other small animation fixes.
 

Edited by QuincyR
Posted (edited)

UCR-Next v0.14.0:
https://github.com/QROACHATHOME/UCR-Next/releases/tag/v0.14.0

Command line

  • Turn every profile off: ucrnext disable-all (or ucrnext none).
  • Silent launch: UCR-Next.exe --silent starts straight in the tray, and so does ucrnext launch --silent. /silent and --tray work too.

Tray

  • Minimize to the tray is a new setting under Settings, and it’s off by default, so turn it on to use it. Minimizing then takes the window off the taskbar, and double-clicking the tray icon brings it back as it was, including maximized.
  • App icon: a white gamepad on a blue square. It shows on the taskbar, title bars, the tray, the Start menu and the installer.

Profiles

  • Game type: Profile settings now has a Game type box. Pick Racing, Light gun, Fighting, Flight and so on, or type your own. It shows as a small tag on the profile in the list.
  • Grouping: tick “Group by game type” above the profile list, or use the View menu, to list profiles under a heading per type. Profiles without a type go last.
  • Sound when active: each profile can have a sound file (wav, mp3 and so on). It plays when the profile becomes active while mapping is on: when mapping starts, when you switch the profile on, or when its program comes to the front. There’s a button to play it now, and a setting to turn all sounds off.

Profile wizard (the wand button above the profile list, or File → New profile with the wizard)

  1. Enter the name, game type, game, program and sound. Only the name is required.
  2. Choose what your controls should act as: an Xbox 360 controller (players 1–4), keyboard keys using MAME’s player 1 or 2 keys (each changeable), or nothing yet.
  3. Press each control. “Set up all, one after another” asks for each in turn, with a Skip button for controls you don’t have. An arcade stick’s two direction buttons become one proper stick axis, and a stick pushed up still reads as up even when its axis runs the other way.

The new profile is switched on straight away but isn’t saved until you save it, like any new profile.

Edited by QuincyR
  • Like 1
Posted

LED-Next version v0.1.9
https://github.com/QROACHATHOME/LED-Next
LED-Next now supports all three: Ultimarc’s PacDrive and NanoLED, LED-Wiz boards, and LED strips over a serial port.
NOTE: I don't have all these boards as it was build from specs, so if anyone out there wants to be a tester, please try it out! It’s 100% built from the makers’ documentation and open-source drivers, mainly LEDSpicer documentation was referenced.

1. PacDrive and NanoLED

  • NanoLED: 60 pins (20 RGB LEDs), board IDs 1–4. It uses the same SDK calls as the PacLED64.
  • PacDrive: 16 outputs, on or off only. An output turns on at 25% brightness or more, so fades snap on or off rather than dimming.

2. LED-Wiz

  • 32 outputs, with unit numbers 1–16 as the ID. A Pinscape in LED-Wiz mode defaults to unit 8.
  • It covers real LED-Wiz boards, Pinscape in LED-Wiz mode and the clones.
  • It talks to the board directly over USB, so no DLL is needed.

3. LED strips

  • Supported controllers: an Arduino or Teensy running an Adalight sketch, or WLED connected over USB.
  • Adding one: in the Boards tab you set the number of LEDs (up to 600), the COM port and the speed.
  • Wiring: each LED has three pins, red, green and blue. You can wire single LEDs to buttons, for example RGB buttons with LEDs inside.
  • Runs of LEDs: “LEDs 3–12 follow P1_B1” lights all of them in that control’s colour. That’s the part for lighting around the cabinet. For lights that aren’t buttons, you add a control of kind “Other” (for example MARQUEE). Games, idle shows and tests then light it like a button. I saw a run follow P1_B1 during the Rainbow test.
  • Keeping it lit: LED-Next resends the last frame every second. Otherwise WLED goes back to its own effect after about 2.5 seconds without data.
  • Like 1
Posted (edited)

LED-Next 0.2.0:

  • now works with HyperSpin, RetroFE / CoinOPS, Attract-Mode, ES-DE, RetroBat, Playnite, PinballX and PinUP Popper. I haven't tested the others, my personal arcade machine only runs Launchbox :)

LED-Next is a free, open-source replacement for LEDBlinky. It reads your existing LEDBlinky data and adds:

  • a visual panel designer
  • a node-graph wiring editor and a wiring wizard
  • per-game lighting with a live preview
  • MAME and other emulators’ lamp outputs
  • idle and start-up light shows

Until now it only worked with LaunchBox / BigBox. Version 0.2.0 adds support for many more front ends:

  • HyperSpin 2 (HyperHQ), HyperSpin 1.x, RetroFE / CoinOPS and RocketLauncher. LED-Next ships a stand-in LEDBlinky.exe, so you point the front end’s LEDBlinky setting at it and it works as before.
  • Attract-Mode / Attract-Mode Plus: LED-Next’s own plugin.
  • ES-DE and RetroBat: small event scripts.
  • Playnite (desktop and fullscreen): an LED-Next extension.
  • PinballX: an LED-Next plugin.
  • PinUP Popper: two lines in each emulator’s launch and close scripts (game start and exit only).

What you get:

  • Lighting follows the front end: the selected game’s buttons light up while you browse, and the lights change for the game you start and change back when you exit.
  • Start-up and shut-down shows play for every front end.
  • One-click setup: a new “Front ends” tab installs the scripts and plugins. It only adds LED-Next’s own files and never changes your front end’s settings. Where a setting is needed, it tells you which one.
  • Games are matched by ROM and system name. ES-DE / RetroBat short names like snes, megadrive and arcade are understood.
  • A command-line tool for anything else: LedNextCmd.exe takes LEDBlinky’s command line, so any front end or script that can run a program can drive it.

Also new since 0.1.9 (new LED boards):

  • Ultimarc NanoLED and PacDrive
  • LED-Wiz, including Pinscape in LED-Wiz mode and the clones
  • Addressable LED strips (WS2812 / SK6812) on an Arduino, Teensy or WLED over USB, for RGB buttons or lighting around the cabinet

Help wanted: the new front ends and boards are built from each project’s documentation and source code, but they haven’t been tried on a real setup yet. If you use one of them, please give it a try and open an issue on GitHub with what worked and what didn’t. Each one has a short guide: docs/FRONT_ENDS.md for the front ends and docs/TESTING_NEW_BOARDS.md for the boards.

Download: HERE
Project: https://github.com/QROACHATHOME/LED-Next

Needs Windows 10 or 11. LEDBlinky must be closed while LED-Next drives the lights.

Edited by QuincyR
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...