jestermgee Posted Wednesday at 03:13 AM Posted Wednesday at 03:13 AM So I just noticed while I have Bezels for other platforms for the NES I see none loading and I have no idea why. I rescraped the whole library of games and selected to download bezels but nothing seems to change and not even the fallback displays. I also tried to download the Bezel Project app however that confuses me as to what to even click in there and even after setting the path to RetroArch within Launchbox folder, I click through until I get to the point to check for bezels then nothing seems to happen. I guess I am overlooking something but what is the easiest way to just download like the whole NES bezel library and stick it in the RetroArch folder? Quote
jestermgee Posted Wednesday at 04:07 AM Author Posted Wednesday at 04:07 AM I managed to get The Bezel Project to download the NES bezels and I see them all available in the folder C:\LaunchBox\Emulators\RetroArch\overlays\GameBezels\NES I assume this is not matching the ROM names because they still do not load but I can manually assign them, tho that isn't something I wish to do for 500 odd games. What can I do to have these download in LaunchBox? Seems there is an obvious "Download Missing Bezels" option I cannot find like all other media and it is only NES I have this issue with, all other consoles seem to have initially setup fine. Quote
dragon57 Posted Wednesday at 04:24 AM Posted Wednesday at 04:24 AM 15 minutes ago, jestermgee said: I managed to get The Bezel Project to download the NES bezels and I see them all available in the folder C:\LaunchBox\Emulators\RetroArch\overlays\GameBezels\NES I assume this is not matching the ROM names because they still do not load but I can manually assign them, tho that isn't something I wish to do for 500 odd games. What can I do to have these download in LaunchBox? Seems there is an obvious "Download Missing Bezels" option I cannot find like all other media and it is only NES I have this issue with, all other consoles seem to have initially setup fine. Which version of the Bezel Project app did you use? If the latest, it installs and directs to modify the retroarch command line with the -c option so retroarch knows how to handle what you installed. Quote
jestermgee Posted Wednesday at 05:01 AM Author Posted Wednesday at 05:01 AM It is the latest, downloaded today but I am not aware of this option you refer to. Quote
dragon57 Posted Wednesday at 06:56 AM Posted Wednesday at 06:56 AM 1 hour ago, jestermgee said: It is the latest, downloaded today but I am not aware of this option you refer to. When you first fire up the app, on the second pop-up, you should see the following: That example is key to making sure LaunchBox is using the required syntax. Quote
jestermgee Posted Wednesday at 11:44 AM Author Posted Wednesday at 11:44 AM Yeah, still not sure what to do there. Where do I add this command line parameter? Quote
jestermgee Posted Wednesday at 12:23 PM Author Posted Wednesday at 12:23 PM Added this: Pointing to this file this file: Still doesnt work. Just cannot find any real info on how the bezels are suppose to work or how to set it up to work. Almost everything in LB is pretty automatic and straight forward but this seems strangely cryptic Quote
JoeViking245 Posted Wednesday at 02:00 PM Posted Wednesday at 02:00 PM Do you have any files in your C:\LaunchBox\Emulators\RetroArch\config\Nestopia\ folder? Do you have any files in your C:\LaunchBox\Emulators\RetroArch\overlays\GameBezels\NES\ folder? I selected all games in my Nintendo Entertainment System platform and ran Tools < Download < Update Metadata and Media for Selected Games... Then in the wizard, selected Check None for LB and EmuMovies images, checked Download Bezels and chose Theme Bezels (the default). Then selected Yes, Download and replace all.... After a few minutes (when it was done) launched a game and the bezel appeared. It showed a default Famicom bezel for 1942 and a game-specific bezel for Kart Fighter. aka, it Just Worked™. The 2 folders mentioned above (plus a couple others) is where new files (based on today's date) appeared. Not sure if your platform being called Nintendo (vs. Nintendo Entertainment System) has anything to do with it. But more-so, verify that the platform is set to Scrape-as Nintendo Entertainment System. Quote
dragon57 Posted Wednesday at 05:28 PM Posted Wednesday at 05:28 PM 5 hours ago, jestermgee said: Added this: Pointing to this file this file: Still doesnt work. Just cannot find any real info on how the bezels are suppose to work or how to set it up to work. Almost everything in LB is pretty automatic and straight forward but this seems strangely cryptic You are supposed to reference the cfg the installer created in the main retroarch directory (where retroarch.exe lives). See if you have a cfg file called retroarch_nes.cfg there. Quote
jestermgee Posted Wednesday at 09:45 PM Author Posted Wednesday at 09:45 PM 7 hours ago, JoeViking245 said: Do you have any files in your C:\LaunchBox\Emulators\RetroArch\config\Nestopia\ folder? Do you have any files in your C:\LaunchBox\Emulators\RetroArch\overlays\GameBezels\NES\ folder? I selected all games in my Nintendo Entertainment System platform and ran Tools < Download < Update Metadata and Media for Selected Games... Then in the wizard, selected Check None for LB and EmuMovies images, checked Download Bezels and chose Theme Bezels (the default). Then selected Yes, Download and replace all.... After a few minutes (when it was done) launched a game and the bezel appeared. It showed a default Famicom bezel for 1942 and a game-specific bezel for Kart Fighter. aka, it Just Worked™. The 2 folders mentioned above (plus a couple others) is where new files (based on today's date) appeared. Not sure if your platform being called Nintendo (vs. Nintendo Entertainment System) has anything to do with it. But more-so, verify that the platform is set to Scrape-as Nintendo Entertainment System. If it were that easy I likely wouldn't be here. I've changed the name and updated all path references to "Nintendo Entertainment System" and done another full download of the bezels in LB, it has downloaded the whole pack, I see the images and cfg files in the correct folder and in RetroArch I have the Overlay settings enabled but still nothing shows. Quote
jestermgee Posted Wednesday at 09:59 PM Author Posted Wednesday at 09:59 PM 4 hours ago, dragon57 said: You are supposed to reference the cfg the installer created in the main retroarch directory (where retroarch.exe lives). See if you have a cfg file called retroarch_nes.cfg there. I have changed the pointer to the file in the RetroArch root called "Nintendo-Entertainment-System.cfg" but no change. Quote
dragon57 Posted Wednesday at 10:08 PM Posted Wednesday at 10:08 PM 7 minutes ago, jestermgee said: I have changed the pointer to the file in the RetroArch root called "Nintendo-Entertainment-System.cfg" but no change. You are sure you don't have more than one installation of Retroarch? The Bezel app would configured that cfg to display bezels. The only other issue would be rom naming not mattching the bezel names or LaunchBox using a different Retroarch installation. Quote
jestermgee Posted Wednesday at 10:26 PM Author Posted Wednesday at 10:26 PM 9 minutes ago, dragon57 said: You are sure you don't have more than one installation of Retroarch? The Bezel app would configured that cfg to display bezels. The only other issue would be rom naming not mattching the bezel names or LaunchBox using a different Retroarch installation. I only have 1 install, nothing complicated. As for the rom name not matching or being incorrect, no idea what the rom name needs to be specifically, I have 500 roms, I never changed the names but can't be sure they match whatever is expected. For example, these are some of the rom names, actual rom files within are named same as the zip file: Quote
jestermgee Posted Wednesday at 10:28 PM Author Posted Wednesday at 10:28 PM I did completely delete all bezels and configs for the NES, reset the LB name back to "Nintendo Entertainment System" and set to download the NES bezel back again. The CFG is in the root of RetroArch, I add this to the command parameters and I now do get the default system bezel, but no specific game bezels for any games tested so I assume this is probably naming issue with roms. Question wuld be how to address this easily since all other metadata in LB itself is working just fine. Quote
dragon57 Posted Wednesday at 10:30 PM Posted Wednesday at 10:30 PM (edited) The rom names are the problem. The bezels, for consoles with cartridges, use the No-Intro naming standard. The easiest fix is to download and install a No-Intro NES rom set. Launchbox will use the same art already downloaded. If you don't want to do that, you would have to use one of the fuzzy matching utilities to match your roms with the bezel set. I use the Fatmatch utility for jobs like that. Edited Wednesday at 10:30 PM by dragon57 Quote
jestermgee Posted Wednesday at 10:34 PM Author Posted Wednesday at 10:34 PM Ok, thanks for your assistance. I hoped something within LB/RA would resolve the names to match but I can switch out the roms with the correct named set, located them already so will give that a go. Quote
jestermgee Posted yesterday at 04:53 AM Author Posted yesterday at 04:53 AM (edited) Ok, I have things solved and the problem I have been having here is limited amount of information to go on and a lack of understanding on my part as to how it works along with limited information about how all the files link together. Firstly, there is no need to download The Bezel Project App if you are using LaunchBox as LB will handle both the downloading and the individual game config files to resolve the difference between Rom name and the expected official Rom name in RetroArch Second, there is also no need to add the command parameter for -c "emulator.cfg" so this was a confusing steer. @JoeViking245 was correct however there were some extra steps I needed to take before things worked and also I decided to spend time to test and figure out how the actual files are linked and how they work. The way the Bezels are linked to the Roms imported into LaunchBox (even if they do not match the actual expected rom name) is via a config file which points to a another config file which points to the bezel image. All of this is handled by LaunchBox when you import bezels but for my own reference for future and anyone else that has struggled to find the info online: Within \LaunchBox\Emulators\RetroArch\config there will be folders for each of the emulators used in RetroArch with .cfg files inside them. Example I am setting up Bezels on an existing Atari 2600 library where my Rom names do not match the official Rom Listed names. To view the emulator I am using, within LaunchBox I open Tools > Manage > Emulators Then select RetroArch in the list then select to Edit Locate the console to update bezels for and note the emulator in use. For mine here it is Stella 2023 Close this window down then before getting started, I would highly recommend to first clear out any existing config/image files as I have done this a few times over and even when selecting to overwrite all files it has not worked until I cleared all files out before starting. If unsure, make a backup first of any existing folder then do your damage. Open the folder \LaunchBox\Emulators\RetroArch\config Locate the folder/s for the emulator, in my case there are actually 3 that are available and all can be deleted. The reason I know these can all be deleted is during a previous attempt all 3 of these folders were backed up automatically by LaunchBox when it does the replace process. These will all get recreated when we download the bezels: These config folders hold *.cfg files for each rom in your collection with the name of your rom file. THis is generated by LaunchBox based on the rom names and each file must match your rom name. If you view the data within a config file it simply points to the official named config file for the rom in the overlay folder. Note that the name of the config file in the config folder is simply "Carnival.cfg" which is the name of my Rom file and this points to Carnival (Europe). cfg in the /overlays/GameBezels/Atari2600 folder: If we locate this file we will see this simply points to the name of the bezel image file: So when a game is loaded, the file in config is used to match the query to the config file in the overlays folder which then reads the location of the image file. \LaunchBox\Emulators\RetroArch\overlays\GameBezels So in addition to deleting the folders for the emulator in the config folder, also delete the folder where all the config/image files are found in the GameBezels folder, in this case Atari2600 With all the files removes, open LaunchBox and then for the emulator to download bezels for, select ALL games within the emulator in your browser list and select Tools > Download > Update Meida For All Games If you already have your images and metadata setup for your library then, just click Next atb the first screen, leave the option to search metadata in local database, deselect ALL images and media from being downloaded for both the default media and EMUMovies data and then finally you will get to the Bezels download option. Select to download Theme Bezels (fallback to system bezels) then on the final screen select to Download and replace Media so any files left over should be overwritten and updated. That should be all that is needed. LaunchBox will create config files for each rom in your collection that has an available bezel and all bezels will download into the overlay folder. Be sure to then check when you launch the first game for the emulator that within the options (F1) > Quick Options > Screen Overlay the display overlay is switched ON Funnily, while that seems to be how it works and I have managed to get 5 emulators all up and running following this method, I hit the Atari 7800 and nothing I try will make any bezel display and I am basically over it now and just don't care to waste more time on it. Edited yesterday at 05:43 AM by jestermgee Quote
dragon57 Posted yesterday at 05:55 AM Posted yesterday at 05:55 AM Sorry for the mixed up 'solutions' Joe and I were posting. Your final observations are correct as far as I understand how LaunchBox handles my Bezel Project files. I only inserted my instructions because you said you used the Bezel app, which I am the author of. I have users that only use the Bezel app and it can co-exist along side of LaunchBox, but as you say, it is no longer required once LaunchBox integrated Bezel support into the product. I hope you get everything working the way you want. Always post questions if you hit a speed bump. There is a wealth of knowledge here on the forums. Quote
jestermgee Posted yesterday at 06:39 AM Author Posted yesterday at 06:39 AM 40 minutes ago, dragon57 said: Sorry for the mixed up 'solutions' Joe and I were posting. Your final observations are correct as far as I understand how LaunchBox handles my Bezel Project files. I only inserted my instructions because you said you used the Bezel app, which I am the author of. I have users that only use the Bezel app and it can co-exist along side of LaunchBox, but as you say, it is no longer required once LaunchBox integrated Bezel support into the product. I hope you get everything working the way you want. Always post questions if you hit a speed bump. There is a wealth of knowledge here on the forums. Yeah I came across some info that suggested to use the app but as I understand, in order for that to work the rom names must match the actual cfg namee in the overlay section which for an existing library that was not curated using official naming standards, is a hard one to rename and while I can re-download collections which do match the names, the issue is I have to then cull all the fat out of the collections as I prefer a more curated collection over a fully bloated "everything" collection. While there is info it is hard to locate the actual applicable info. Video wise, there is almost nothing I can find that goes over how the whole bezel system works and much of the info assumes your files match the cfg files and none of this is covered anywhere. I'm usually pretty good with figuring things out bt there is still some mystery around this area sincfe even the details I posted above seem to not always work, why I cannot get my 40 Atari 7800 games to link up with bezels is beyond me. Quote
dragon57 Posted yesterday at 06:45 AM Posted yesterday at 06:45 AM 1 minute ago, jestermgee said: Yeah I came across some info that suggested to use the app but as I understand, in order for that to work the rom names must match the actual cfg namee in the overlay section which for an existing library that was not curated using official naming standards, is a hard one to rename and while I can re-download collections which do match the names, the issue is I have to then cull all the fat out of the collections as I prefer a more curated collection over a fully bloated "everything" collection. While there is info it is hard to locate the actual applicable info. Video wise, there is almost nothing I can find that goes over how the whole bezel system works and much of the info assumes your files match the cfg files and none of this is covered anywhere. I'm usually pretty good with figuring things out bt there is still some mystery around this area sincfe even the details I posted above seem to not always work, why I cannot get my 40 Atari 7800 games to link up with bezels is beyond me. I agree, your 7800 problem is curious. I have never seen an issue downloading and integrating those in the past. I just checked the file I provide to LaunchBox which gives an inventory of all available bezels across all the systems we support. The 7800 is there for themed and system art bezel variations. If you figure out anything, share it here so others can benefit. Thanks for all the feedback. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.