Jump to content
LaunchBox Community Forums

DeadVoivod

Members
  • Posts

    691
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by DeadVoivod

  1. I have exactly the same problem, but only on some games, not all of them, but most. Tried changing settings over and over again, but nothing seemed to help so far. 

    I think it depends on the region, as some had the "scanlines", downloaded the other version, can't remember which region, and that one worked. But settings are all on auto, and if I change the region, it still does the same error. 

  2. Here were my thoughts. PCSX2 runs absolutely fine. 
     

    I bought a mini PC, the Hades Canyon, mainly to use with LB.
    The Intel NUC Hades Canyon i7-8809G is an Intel NUC Kit with 8th Generation Intel Core Processors and has a Radeon RX Vega M GH graphics (4GB, 8M Cache, up to 4.20 GHz) which supports up to 6 displays. Graphics outputs are 2x Mini-DP 1.2, 2x Thunderbolt 3, F+R HDMI 2.0a. 

    Other connections like USB are Front: USB3, 2x USB 3.1g2 (Type A and C); Rear: 4x USB3, 2x Thunderbolt3 (USB3.1g2); INT: 2x USB2, 2x USB3, so plenty of them. 

    Unfortunately it doesn't come with memory or storage, so I bought that separately, as memory I bought the Crucial Ballistix Sport LT 2x16GB 2.666Mhz DDR4. Storage wise I bought a Samsung 970 EVO Plus 250GB M.2 NVMe SSD for OS, and a Crucial MX500 1TB (3D NAND, Sata M.2) for games and such. 

    Furthermore I'm using an external 5TB for my ROMs collection for LaunchBox, which should be enough. 

    o8Hmz5u.jpg

  3. I bought the Intel NUC Hades Canyon mini PC, absolutely perfect, although not the cheapest if you don’t wanna spend too much. Here’s my setup.

    I bought a mini PC, the Hades Canyon, mainly to use with LB.
    The Intel NUC Hades Canyon i7-8809G is an Intel NUC Kit with 8th Generation Intel Core Processors and has a Radeon RX Vega M GH graphics (4GB, 8M Cache, up to 4.20 GHz) which supports up to 6 displays. Graphics outputs are 2x Mini-DP 1.2, 2x Thunderbolt 3, F+R HDMI 2.0a. 

    Other connections like USB are Front: USB3, 2x USB 3.1g2 (Type A and C); Rear: 4x USB3, 2x Thunderbolt3 (USB3.1g2); INT: 2x USB2, 2x USB3, so plenty of them. 

    Unfortunately it doesn't come with memory or storage, so I bought that separately, as memory I bought the Crucial Ballistix Sport LT 2x16GB 2.666Mhz DDR4. Storage wise I bought a Samsung 970 EVO Plus 250GB M.2 NVMe SSD for OS, and a Crucial MX500 1TB (3D NAND, Sata M.2) for games and such. 

    Furthermore I'm using an external 5TB for my ROMs collection for LaunchBox, which should be enough. 

    o8Hmz5u.jpg

  4. I changed the input settings in the xml like you said, and it worked, but probably only until Windows changes the controllers again. 

    I tested MAME once again, and controller 2 had controls completely reset, why ever. So now I configured it again, and set my default.cfg file to read only, perhaps that helps. 

    EDIT: No honestly, this starts to be ridiculous now. I restarted the PC on purpose, MAME configuration is again reset to 0. I don't understand anymore. After testing, I noticed that the MAME configuration strangely gets reset every time you reboot your PC. 

    So far RetroArch kept the correct settings. 

    Do you think it would help using only 1 8BitDo controller, and as 2nd one an XBox One controller? Or would I encounter the same problems regardless?

  5. 11 hours ago, JoeViking245 said:

    I didn't pay attention to see that you were using MAME in RA.  I've never used MAME in RA myself.

    I don't. I use MAME64 210. MAME works now, fingers crossed. 

    I meant everything else I'm running through RetroArch.

    So basically this problem wouldn't even change when using standalone emulators? Because I was thinking on doing that, and omitting RetroArch completely.  

  6. Well this is honestly getting on my nerves now, RetroArch swapped again my controllers, now 1 is again 2, and 2 is 1. With the 1 I cannot start a game unless number 2 is switched on.

    Why does this happen?? Goes beyond me!!

    Everything is working fine with both controllers connected, I disconnect number 2, nothing is working and the RetroArch bindings seem to have changed again. 

    What changes on DRIVER\Joypad if I chose xinput or dinput?

    What exactly is the Remap Binds for this core? 

    And what's the Autoconfig for? 

    I have usually both of the latter ON. 

     

  7. I always used pcsx_rearmed so far, is the mednafen one better? 

    Anyways I cannot find the mednafen_psx core within RetroArch via the online updater? 

    Or still better to use standalone ePSXe? 

  8. So I re-paired them again, now the opposite way. 

    MAME seems to work fine now, even after a restart of the PC, so that mame64 -v might have worked, thanks for the tip. 

    Only thing was that I had to reconfigure my controllers in every single emulator and RetroArch, but so far, it seems good.

    • Game On 1
  9. I'm trying to get controls mapped in MAME, but I seem to have a huge problem.

    I have 2 of the same 8BitDo SN30 Pro+ controllers, and MAME recognizes them as the same ones. Whenever I press a button on any controller, it maps it as J1, thus I can't configure them both. 

    I'm using the MAME 210 non GUI exe. 

    For other emulators it works, as one is set up as a bluetooth wireless controller, and the other one as bluetooth XINPUT compatible. 

  10. I created playlists for my platforms in LB. 

    When I go to BB, I would like platforms to be shown first when opened, which it does. Then I chose a platform, and it shows me the complete games list, whereas I would like to see the playlists only, choosing a category and then take me to the category I want. How is that done again, cannot find anything? 

    Plus if I chose playlists in view, the screen is black, playlists don't show up. It worked already before, no idea what I changed. 

    EDIT: Under Images\Playlists I have several images, but only for 3DO, PSP Minis and Nintendo GC, although they're the same for each system, but that doesn't matter. 

×
×
  • Create New...