-
Posts
665 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Downloads
Gallery
Blogs
Posts posted by dov_EL
-
-
3 minutes ago, lordmonkus said:
To be perfectly honest I have no idea when it comes to your controller question.
As for the V Sync I believe that's in the config file somewhere but it has been a while since I even looked at the stand alone Mupen64plus. The Retroarch core is the best way to emulate the N64 right now.
I have problem with shaders (retroarch and Mupen)
Because the core I use for 2d consoles, it destroys Nintendo 64 graphics , I use only one shader for all 8-16 bit consoles
-
I'm not at home so I can not try it. But would the controls work without an analog lever? I use the XinMo controller in Bartop, it works with retroarch, works with MAME.
Would it work with Mupern too?PS. I can not see how to activate V Sync
-
15 hours ago, lordmonkus said:
Maybe, you may have messed with the palette as well which depending on the one you have selected can look super funky.
No .
alt+EnterAlt+W
Alt+F4
and now work
- 1
-
In short, a new experiment will be launched with a friend, very experienced in creating Bartop
hostare immaginicertificity.com
Nanobartop
This photo was made with a multigame Chinese card, which has a bad result. So I told my friend to make one with Mini PC and LaunchBox.Monitor is 10 inc ( HDMI/VGA) .
host imagecertificity.comFor this NANO Bartop, I chose a Mini PC Cherrytrail
CPU Intel Atom x5-Z8350 Processor (2M Cache, up to 1.84 GHz)
Gpu Intel HD Graphics
OS Windows10 OS
RAM DDR3 2GB/
HD 32GB 1000Mbps
LAN Bluetooth 4.0 WIFI IEEE 802.11a/b/g/n 2.4G+5.8GAs soon as the work begins, I'll show you a video
-
Im action -
-
-
Where do I find this setting?
-
-
1 minute ago, lordmonkus said:
You won't be able to use HLSL or any shaders in Mame (standalone), you will need a dedicated GPU to use them. But in Retroarch you should be able to use the lighter weight shaders like CRT-Pi.
Yep , Hyllian Fast, and CRT-pi work amazing ,
Now this is Apollo Lake , see benchmark
-
1 minute ago, lordmonkus said:
Yes, you can have a different shader though I recommend no shader. Just internal resolution boost and anti aliasing in the core options.
You can try using the core override function in Retroarch or just make a custom config and have it load that config when you start it up
-L "cores\mupen64plus_libretro.dll" -c "config\Nintendo64.cfg"
AH!!! Thank You !!
Only in some cases even for the same CORE, for example in some vertical scrolilng games (like shot em ups), it would be nice to have a different shader.
So maybe you could act on the launchbox ROM for a custom game configuration? -
If we use Retroarch for Nintendo 64, the shaders we set for NES, SNES etc. They do not do well.
Can We Have Different Shaders for Different Core? For example, Hyllian for Nes, Snes etc. And another shaders for Nintendo 64 Core?
What advice for PSX, Nintendo 64? -
In my Bartop I used a Baytrail Mini PC with 2 GB ram for two years with Launchbox .
Work amazing with
Nes, Snes, Genesis , Master System , Turbo Grafx , TG CD ROM and MAME .
With Mame I could never use HLSL filters, but I found a mask that does not regret the HLSL filters and With retroarch i use Shaders lite and rock!After making a subscription to Emumovies, I have also downloaded the videos .
As long as I add video for 3 platforms, my old Baytrail still holds very well, but if I put videos on all platforms, then Ram's lack of feelSo I decided to change PC, and I ordered a Mini PC with Apollo Lake n4200
host immaginicertificity.comMy choice fell on Beelink ap42
uploadcertificity.comBrand: Beelink
Model: AP42
Type: Mini PC
System: Windows 10
CPU: Intel Pentium N4200 Core: Quad Core
GPU: Intel HD Graphic 505
RAM: 4 gb Type: DDR3
ROM: 64G
Inside Slot for SSD 42mmEvery time I bought something from China, I always had to wait 1 month before arriving in Italy.
I hope this will arrive soon, I have selected DHL (EU)Who knows with this new hardware where I can push with the emulation, who knows if I can enable MAME's HLSL filters.
Surely with 4gb of RAM, launchbox will take a bit of breath:;) -
http://emumovies.com/
Down ? -
and.... is possible add INSERT COIN TO PLAY Only for console
1 Coin 30 min
2 coin 60 min
etc.
Mame have coin button built in -
Many use MAME PC dated or Mini PC with CPU Baytrail or Cherrytrail where the HLSL filter can not be activated specifically in relation to the absence of separate GPU.
I rediscovered a Mame function with a special mask used as a filter, which does not regret HLSL for lower spec PCs.Download this file
https://1drv.ms/u/s!AhJaE5ijxFe5hdMolEFexICm-a-ZpA
unzip the "ARTWORK" Mame Folder .
Once you placed the file in the folder, open mame.ini
and write the filter you want to use (including .png as in the photo)
Scroll up to# WINDOWS VIDEO OPTIONS
#
menu 1
effect Scanlines75Dx4.png 1Quote# WINDOWS VIDEO OPTIONS
#
menu 1
effect Scanlines75Dx4.png 1
In Mame setting Turn even triple buffering options / video- V Sync etc.
ENJOY !!!!!! FInally Amazing scanlines without HLSL !!!!
LOVE !!!
- 1
-
Work perfect (Cpu Baytrail too )
- 1
-
I really like being able to put a pin to go into the settings, but I would like to close the door to strangers long before the setting with the PIN. And to do this it would be necessary to put on the main SHUTDOWN UX, and not in setting.
What do you think ? -
So just install only the Dependencies, and then with the files in exactly the same directory?! ?
Mame does not require an installation, as well as retroarch, in reality they are only compressed files.
THANK YOU -
I Have 3 PC .
every time Microsoft launches a major release, I do not like to update, but completely I format the PC .
Sure enough I have to repeat again the configuration launchbox + all emulators on every PC.
Mainly I use only MAME and Retroarch .I saw this video and wanted to know if you can make a real backup, so you can move on all 3 of my PC not do it all again if I format the computer .
at each installation in Windows 10 lacks this DLL that must be entered manually for the operation retroarch d3dx9_43.dll .This is Launchbox Dependencies link - https://mega.nz/#!Q8UVXLRT!LVjgSIkpu826al7QhV32JtOg_jBUTE726RYXX_hqi7U
We can clarify here what are the steps step by step to do to move launchbox-retroarch and mame on a new PC without reinstalling everything? So you just have to configure the controls. -
................. who wanb create Playlist C64 Playable game without keyboard ?
Ps. the problem is : Retroarch not save Retrojoy setting- 1
-
Ok , F10 for GUI , Enable retroJoy , and Work ..
but , is impossible remap other key like spacebar , 1 or 2 button etc. -
Joytstick with Vice (retroarch) not work in my Bartop DAMN !!!
-
Mupen64plus Setup Tutorial (Launchbox Compatible)
in Emulation
Posted
How to ?
Load Core ->Mupen->Quick Menu -> Shaders ->
And now ?