Jump to content
LaunchBox Community Forums

starting launchbox


jf1963

Recommended Posts

I just installed Launchbox 6.2 on a Win7 Pro laptop and takes 30 to 45 seconds for init windows to come up which is no big deal, but it then hangs on "initializing" and the task manager shows it is not responding. Any ideas? Thank you! Jim
Link to comment
Share on other sites

SentaiBrad said How old is your laptop? Where is LaunchBox installed, as in is it on the internal 5400 RPM Drive?
hope this helps Thanks SiSoftware Sandra Computer Model : Toshiba Satellite A305 Type1Family Serial Number : ********* Mainboard : Intel Base Board Product Name Serial Number : Base Board S************ BIOS : INSYDE 1.50 06/27/2008 Total Memory : 4GB DDR2 SO-DIMM Processors Processor : Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz (2C 2GHz, 2MB L2) Socket/Slot : FC µPGA (Socket P) Chipset Memory Controller : Toshiba Mobile PM965/GM965/GL960 Express Processor to DRAM Controller 4x 166MHz (664MHz), 2x 2GB DDR2 SO-DIMM 664MHz 128-bit, Integrated Graphics Memory Module(s) Memory Module : Hynix (Hyundai) HYMP125S64CP8-Y5 2GB DDR2 SO-DIMM PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3) Memory Module : Hynix (Hyundai) HYMP125S64CP8-Y5 2GB DDR2 SO-DIMM PC2-5300U DDR2-666 (5-5-5-15 3-20-5-3) Video System Monitor/Panel : Samsung Generic PnP Monitor (1600x1200, 154AT07-T01 , 15.4") Video Adapter : Mobile Intel(R) 965 Express Chipset Family (8SP SM4.0 500MHz, 64MB DDR2 128-bit, Integrated Graphics) Graphics Processor Storage Devices HGST Hitachi HTS543232L9SA00 (320.1GB, SATA150, 2.5", 5400rpm, 7MB Cache) : 298GB (C:) PIONEER DVD-RW DVRKD08L (ATA33, DVD+-RW, CD-RW, 64kB Cache) : N/A (D:) Logical Storage Devices Drive (C:) : 297GB (NTFS, 4kB) @ HGST Hitachi HTS543232L9SA00 (320.1GB, SATA150, 2.5", 5400rpm, 7MB Cache) TOSHIBA SYSTEM VOLUME : 1GB (NTFS, 4kB) @ HGST Hitachi HTS543232L9SA00 (320.1GB, SATA150, 2.5", 5400rpm, 7MB Cache) Optical Drive (D:) : N/A @ PIONEER DVD-RW DVRKD08L (ATA33, DVD+-RW, CD-RW, 64kB Cache) Peripherals LPC Hub Controller 1 : Toshiba ICH8M-E (ICH8) LPC Interface Controller Audio Device : Toshiba 82801H (ICH8) HD Audio Controller Audio Codec : Realtek Semi High Definition Audio Disk Controller : Toshiba 82801H (ICH8) Ultra ATA Storage Controllers Disk Controller : Toshiba Mobile SATA AHCI Controller Disk Controller : Toshiba SD Bus Host Adapter USB Controller 1 : Toshiba 82801H (ICH8) USB UHCI #4 USB Controller 2 : Toshiba 82801H (ICH8) USB UHCI #5 USB Controller 3 : Toshiba 82801H (ICH8) USB2 EHCI #2 USB Controller 4 : Toshiba 82801H (ICH8) USB UHCI #1 USB Controller 5 : Toshiba 82801H (ICH8) USB UHCI #2 USB Controller 6 : Toshiba 82801H (ICH8) USB UHCI #3 USB Controller 7 : Toshiba 82801H (ICH8) USB2 EHCI #1 FireWire/1394 Controller 1 : Toshiba R5C832 IEEE-1394 Controller SMBus/i2c Controller 1 : Intel ICH SMBus Printers and Faxes Printer : Microsoft XPS Document Writer (600x600, Colour) Printer : HP ENVY 5660 series (600x600, Colour) Fax : Microsoft Shared Fax Driver (200x200) Scanners and Cameras Scanner : Hewlett-Packard HP ENVY 5660 series (NET) (Scanner, USB) Network Services Network Adapter : Realtek PCIe FE Family Controller (Ethernet) Wireless Adapter : Intel(R) Wireless WiFi Link 4965AGN (802.11g (ERP), AES-CCMP, 144Mbps) Power Management Battery No 1 : PA3535U-1BAS 81.42Wh/6.60Ah Operating System Windows System : Microsoft Windows 7 Ultimate 6.01.7601 (Service Pack 1) Platform Compliance : x64
Link to comment
Share on other sites

I didn't need all that, but thank you it is helpful. Unfortunetly, your CPU, RAM and maybe your Hard Drive (I can't tell, but if it's an internal 2.5" drive, it's probably SATA3 5400RPM) seem to be what's holding this back. It should STILL launch though, so I am confused. Did you install LaunchBox in it's default location? Do you happen to AV Software opened while you are trying to open LB?
Link to comment
Share on other sites

SentaiBrad said I didn't need all that, but thank you it is helpful. Unfortunetly, your CPU, RAM and maybe your Hard Drive (I can't tell, but if it's an internal 2.5" drive, it's probably SATA3 5400RPM) seem to be what's holding this back. It should STILL launch though, so I am confused. Did you install LaunchBox in it's default location? Do you happen to AV Software opened while you are trying to open LB?
It is a 5400 rpm drive and i took all the defaults when installing. immunet 3 (AV) was running in the background. ill try uninstalling, stopping immunet, then reinstall launchbox. thanks
Link to comment
Share on other sites

jf1963 said It is a 5400 rpm drive and i took all the defaults when installing. immunet 3 (AV) was running in the background. ill try uninstalling, stopping immunet, then reinstall launchbox. thanks
If it really is the AV, you shouldn't need to uninstall/reinstall LB - just try turning it off temporarily. If that works, you'll want to add LB to your AV's exception/white list. If it doesn't, it's likely the result of your hardware - it should still boot up though, even if it's slow. Keep in mind that on low end hardware something may show "not responding" and not actually be crashing - it might just take a while. If the AV is off and it still does this, just let it sit there a few minutes and see if it eventually finishes.
Link to comment
Share on other sites

You could also try a different folder other than your user folder that it defaults to, sometimes that can be an issue. Even though speeds wont be great, if you have an external hard drive you can also try that. On regular Hard Drives it's generally not a good idea to put demanding applications like games, LaunchBox, or editing software on your main drive (as an example). If you check out Task Manager, with just your OS running you can see the disk usage going crazy. LaunchBox wants to use your disk usage and cpu, especially during boot and especially when it's caching game images. If there isn't enough read / write speed to go around, it will just take longer. Like I sand Zombeaver said, it should still launch though, even if it says not responding.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...