Marquee not fitting full screen

[RedHoodRobin64]

So i had this briliant idea... or so i thought. I bought a hdmi multiveiwer to make 1 screen act as 2 monitors. It has a view which is shown in the video where the main display takes up 2/3 the tv and 1/3 as the 2nd. I thought this would be so great because the main display would be close to a 4 by 3 aspect ratio, and then my marquee videos ive designed could play at the top.

But in portrait mode the video will not fit full screen. Is there a way to force it to stretch completely? Normally it would look horible but the way the tvs split, it would not look distorted. Driving me crazy. I did have to use a vertical theme for the main display. Any help would be greatly apreciated 

[C-Beats]

Not sure what control you're using to display the video but pretty sure all of our controls have a "StretchVideo" property you can set to true. This will make the vid stretch to fill the space the control takes up.

[RedHoodRobin64]

Here is windows 11 at main screen to show its all full screen

And the rei hdimi 2x1 multiveiwer was the only device that i found that would split this way.

5 minutes ago, C-Beats said:

Not sure what control you're using to display the video but pretty sure all of our controls have a "StretchVideo" property you can set to true. This will make the vid stretch to fill the space the control takes up.

Where are these settings located?

[RedHoodRobin64]

I think this really has to do with both sections of the monitor being in portrait mode. I couldnt find any of the setting you mentioned so i am going to try a few more things

[RedHoodRobin64]

Heres a link to the device for those interested

https://www.amazon.com/Viewer-Switcher-Seamless-Support-Security/dp/B01BI2N0B4/ref=mp_s_a_1_6_sspa?adgrpid=67432976386&gclid=CjwKCAiA_6yfBhBNEiwAkmXy56hSNdpCUZPJzDWGSZvySQTIef2JdkhU0cDrb1arWCtuLKLlCLCCKhoCHG4QAvD_BwE&hvadid=410037648632&hvdev=m&hvlocphy=9059694&hvnetw=g&hvqmt=b&hvrand=2437477357348831363&hvtargid=kwd-423744875003&hydadcr=19227_11279488&keywords=hdmi%2Bmultiviewer%2B2x1&qid=1676405226&sr=8-6-spons&psc=1&smid=ALEWIQ2F9CQDR&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExOVVLOVQ2MUVNWElOJmVuY3J5cHRlZElkPUEwODA2MjE0V0hKUVJDV1NQUjhRJmVuY3J5cHRlZEFkSWQ9QTA0NzA5MDdPUVpDTjhXVEo5T0cmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfbXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

[C-Beats]

What I was talking about was in the XAML of the theme. I misunderstood and thought you said you built a theme to do what you were wanting

[RedHoodRobin64]

13 minutes ago, C-Beats said:

What I was talking about was in the XAML of the theme. I misunderstood and thought you said you built a theme to do what you were wanting

Shoot ok. Is there a theme out there that has vertical marquee in mind? Or can i possibly rotate my videos so i can have the top screen horizontal then it would stretch all the way? Or is it hard to edit someones theme to do this?

[RedHoodRobin64]

I have to learn to edit with filmora a litle better but i rotated one of my videos and kept the top portion of the screen landscape mode, and the main section (bottom) as vertical and it worked like a charm. In vertical mode it just wont stretch to full screen with videos. Going to be a pain to flip all my videos but atleast theres a solution

[C-Beats]

I'd just edit the XAML file to work the way you want and then you don't have to touch the vids. Getting the element to stretch the way you want really wouldn't take much work at all.