Region Unlock Codes for Sega Model 3 (Supermodel)

[k_rollo]

 

DAYTONA USA 2: BATTLE ON THE EDGE and POWER EDITION (Model 3 Step 2)
Method 1
Go into the test mode and push the service and test button on the PCB at the same time.
Method 2
Go into the test mode and push Hold Start and Press GREEN (VR4), GREEN (VR4), BLUE (VR2), YELLOW (VR3), RED (VR1), YELLOW (VR3), BLUE (VR2).
(Colours are the VR buttons).

DIRT DEVILS
On the test menu, press Start, Start, Service, Start, Start, Start, Service and Test.

FIGHTING VIPERS 2
in Game Assignments screen set cursor at Country line then press: Left Left Left Right Right Left, then change country using Test switch

GET BASS/SEGA BASS FISHING (Model 3 Step 1.0)
Go into test mode, select the crt test 2/2, push the service button 4 times, exit the crt test, select the Game assignments, push service 3 times (sound), hold service on push number 4 and then press test.

HARLEY DAVIDSON LA RIDERS (Model 3 Step 2)
Go into the test mode, select game assignments up, up, down, down, view, music, view, music.

LA MACHINE GUNS (Model 3 Step 2)
Go into the test mode and push start, start, service, start, start, start, service, test.
(start = player 1 start button).

LE MANS 24hr (Model 3 Step 1.5)
Go into the test mode and push start, start, service, service, start, test.

LOST WORLD (Model 3 Step 1.5)
Go into the test mode and push start, start, service, start, service, test.
(start = player 1 start button).

MAGICAL TRUCK ADVENTURE (Model 3 Step 2)
Enter Self-test Mode
Press “Left Start Button” 2X
Press “Service Button”
Press “Left Start Button”
Press “Service Button”
Press “Test Button

OCEAN HUNTER (Model 3 Step 2)
Enter TEST MODE
Enter GAME ASSIGNMENTS
Press start button as follow:1P 2P 1P 2P 1P 2P 2P
Select Country

SCUD RACE/SUPER GT (Model 3 Step 1.5)
Country setting can be changed in the menu (non-Australian version).

SEGA RALLY 2 (Model 3 Step 2)
Go into the test mode, using the service button do 4 short presses, 2 long, 2 short and 1 long.

SKI CHAMP (Model 3 Step 2)
Enter the self-test mode.
Press the buttons on the control panel in the following sequence:
Blue, Green, Blue, Green, Service, Service button.

SPIKE OUT
set cursor at GAME ASSIGNMENTS line then press:
Button3(Charge), Start, Button4(Jump), Start, Start, Start, Button1(Shift), Start, Start,
then change country in appeared menu.

SPIKE OUT FE
set cursor at GAME ASSIGNMENTS line and holding Service button press:
Button4(Jump), Start, Button4(Jump), Start, release Service button, Button1(Shift), Start, Start, Start, Button3(Charge), Start, Start, Button1(Shift), Start, Test,
then change country in appeared menu.

STAR WARS TRILOGY (Model 3 Step 2)
Go into the test mode and using the service button do the following:
Short, short, short, long, long, short, short, long.

VIRTUA FIGHTER 3 (Model 3 Step 1)
Country setting can be changed in menu (non-Australian version).

VIRTUA STRIKER 2 ’98 (Model 3 Step 1.5/2)
1. Go into "Game Assignment " in the Test mode.
2. Press the Service Button once for about 5 seconds.
3. Press the Service Button three times shortly.
4. Press the Service Button one time for about 5 seconds again.

VIRTUA STRIKER 2 ’99 (Model 3 Step 1.5/2)
1. Go into "Game Assignment " in the Test mode.
2. Press the Service Button once for about 5 seconds.
3. Press the Service Button three times shortly.
4. Press the Service Button one time for about 5 seconds again.
5. Press the Service Button twice shortly.
6. Press the Service Button once for about 5 seconds one more time.

VIRTUAL-ON ORATORIO TANGRAM (5.2 or 5.4g)
On the test menu, press Start, Start, Service, Start, Start, Start, Service, Service and Test.
There appears to change the region to either Japan, USA, Export and Australia.

Edited October 21, 2023 by k_rollo

[k_rollo]

This was posted at the Supermodel official forums, which has since disappeared. The dev has also been thinking of archiving that forum for a while, so it may or may not come back. Thought it could be shared here for a safer place to avoid losing the info.

[Charco]

@Warped Polygon has collated a lot of information related to Model 3 and created configs, NVRAM files, and controller mapping images here: 

 

[k_rollo]

@Charco Yup he has great pre-configs, I follow them as well. I've used a script to remove flashes for HotD from his Model 2 files.