enurweb Posted August 19, 2018 Share Posted August 19, 2018 So I setup GameCube with the built in RetroArch Dolphin core together with 14 other platforms on my main computer. Now, from the start of this project of mine my thought has been to move the whole installation over to an external harddrive. I did the move and plug it into my living room Intel NUC computer and 14 of 15 platforms performs just like I expected and running perfect. However the GameCube which also worked perfect before the move to external drive doesnt work AFTER the move. I first noticed from BigBox and non of the Gamecube games are starting at all. So I went to my Windows desktop starting up LaunchBox and also fra LB non Gamecube games are starting. I check under "manage emulators" and Gamecube are pointing to the dolphin core like it should. I checked the game files are present in their standard location. I mean its and exact copy of the working edition on my main computer. So Im a bit shocked its not working really. Any ideas on this matter please?? I had SO much hassle with Gamecube spending hours and hours to crack config of controlls and thought now that everything was good. I feel gutted and cant see any solution... Quote Link to comment Share on other sites More sharing options...
Retro808 Posted August 19, 2018 Share Posted August 19, 2018 I would first try launching a GameCube game from Retroarch directly on this new setup to make sure it works there. If it does double check the rom file path to make sure where Launchbox says it is matches the drive letter and folder where the roms actually are. Is the whole setup kept portable by having everything (roms and emulators as well) kept in the Launchbox folder structure? You likely already tried this but it was not mentioned. Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 I can of course do a final check launching directly from RetroArch. Yes, my whole setup is based on being portable and was built that way from the start. RetroArch and all game files are in a structure under LaunchBox main folder on the external disk. Paths are checked and looking good in all setups. So for me that is super strange that 1 of 15 messes up like this. Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 Okay, update. I see when Im trying to load directly from RetroArch that Im actually not able to even load the Dolphin core in there. All other cores gets loaded. So I tried updating the core but it still refuse to load the Dolphin core inside RetroArch. Im pretty clueless on how to fix that to be honest. Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 I might add that I had trouble configure controllers on the Dolphin core before moving to external disk. So what I did before moving to ext disk was to try updating Dolphin core to see if it helped with the controllers (which it didnt). It did however download a different Dolphin core, which after a lot of experimenting I got to configure the controlls succesfully. So I kept the setup with two Dolphin cores installed. First core was named Dolphin 0.1 I think and the second active one has a name with Dolphin-emu and some numbers behind. Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 While in RetroArch on the Portable setup re-download the core/s, Quick check to see what loads/runs is to Drop the rom/game into RetroArch, best not to be in Fullscreen for this Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 I already tried re-downloading the Dolphin core without any luck. All the other 14 cores of other systems are running perfect. Quote Link to comment Share on other sites More sharing options...
neil9000 Posted August 19, 2018 Share Posted August 19, 2018 Try going to online updater/content downloader/dolphin and download the dolphin data.zip and see if that helps. Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 (edited) Weird, maybe re-download RetroArch, then try Dolphin core very strange Edited August 19, 2018 by Jaz808 Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 So its just the Dolphin Libretro dll you need ? Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 Dolphin Core from RetroArch 1.7.3 Updated Attached Cores.rar Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 35 minutes ago, neil9000 said: Try going to online updater/content downloader/dolphin and download the dolphin data.zip and see if that helps. Sadly that made no difference. Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 I Attached the Core for you in the post above Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 1 minute ago, Jaz808 said: I Attached the Core for you in the post above Thanks But I dont think thats the issue though. Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 Now... This is even stranger... I went to my main computer since the complete setup is still on that computer as well. Started RetroArch and try to load the Dolphin core. It loads perfect just as before. I then took my external disk and moved it from my Intel NUC Pc in the living room and plugged it back into my main computer. Launched RetroArch from external disk on main computer. BOM.. Dolphin core is loading! So for some stupid reason it seems it only has trouble loading on my Intel NUC PC. What on earth could make that hsppen. Both computers are running Windows 10. Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 DirectX9, Vredist, VB Runfiles, could be many things Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 DirectX can be ruled out. Same with .Net as Windows 10 has a newer version than the one required. Quote Link to comment Share on other sites More sharing options...
Jaz808 Posted August 19, 2018 Share Posted August 19, 2018 The NUC is missing something ?? Quote Link to comment Share on other sites More sharing options...
neil9000 Posted August 19, 2018 Share Posted August 19, 2018 2 minutes ago, enurweb said: DirectX can be ruled out. Same with .Net as Windows 10 has a newer version than the one required. Is it using the integrated intel graphics? Could be a video driver issue in retroarch, try switching to a different driver in the retroarch UI. Quote Link to comment Share on other sites More sharing options...
enurweb Posted August 19, 2018 Author Share Posted August 19, 2018 (edited) Yes its using the Intel Iris Graphics 6100 driver for this Intel NUC box. Standard now in RetroArch is set to video driver: gl Which to choose? Not messing up the other 14 also Edited August 19, 2018 by enurweb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.