angelobodetti Posted April 14, 2016 Author Share Posted April 14, 2016 Hello - I installed PCEnjin for TurboGrafx-CD. Everything seems to be working (for the most part), but I do have 1 issue and 1 question: Issue: I was able to map player 1 to my xbox 360 controller. When I try to map player 2 to my second xbox 360 controller is doesn't allow me and shows it as disabled. Anyone have success using 2 controllers with PCEjin? Question: Can I get PCEjin to boot full screen? I only see options for 4x. Thanks again! Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted April 14, 2016 Share Posted April 14, 2016 If there is a command line argument for full screen then you can use that, but I don't know if one exists. Are the PC Engine cores in RA not working for you? Quote Link to comment Share on other sites More sharing options...
DOS76 Posted April 14, 2016 Share Posted April 14, 2016 Yeah RA is the best PC-Engine emulator I've ever used Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 14, 2016 Author Share Posted April 14, 2016 I used PCEjin because in your YouTube video you said you couldn't get a core to run turbo grafx cd properly. I'd much rather use RA. Which fire for turbo grafx cd works best? Quote Link to comment Share on other sites More sharing options...
DOS76 Posted April 14, 2016 Share Posted April 14, 2016 I believe that he later discovered there was an issue in that version and with some of his files that was causing the problem they work great for me and I'm pretty sure you can use either the pce fast or supergrafx core and both work. Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 14, 2016 Author Share Posted April 14, 2016 Thanks Derek - Which fire do you use? Any tips on bios or anything else? Like I said I have the correct 3.0 bios named and in the system folder for pce_fast but doesn't seem to load. Quote Link to comment Share on other sites More sharing options...
DOS76 Posted April 14, 2016 Share Posted April 14, 2016 Can you get it to load from outside of LaunchBox. Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 14, 2016 Author Share Posted April 14, 2016 No, I always get things running outside then try inside. I have not been able to get turbo grafx cd running in retro arch using pce-fast. Is that the core you're using? Did you do anything other than putting the bios in the system folder? Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 14, 2016 Author Share Posted April 14, 2016 Any help is appreciated - I have spent a few hours trying the pce-fast core, the supergrafx core and every bios i could find. They work in PCEjin but not in RA. I obviously prefer RA and if you are saying you have it working, then it must be something that i'm missing. Thank you! Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted April 14, 2016 Share Posted April 14, 2016 PCE Fast doesn't work for me I am using SuperGrafx. I am fairly certain it is due to BIOS, there is a lot of wrong ones out there. Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted April 14, 2016 Share Posted April 14, 2016 @angelobodetti if you check my forum sig I have a small blog site setup and on there I have a tutorial video on youtube on getting CD based systems up and running. Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 15, 2016 Author Share Posted April 15, 2016 Brad - thank you. I've tried s few bios files with the supergrafx core that didn't work. The bios would work in PCEjin but not RA. Do you know what yours was called before you changed it to syscard3? Lord-monk - I'll check it out but I have all other cd based games working. This one is just impossible for some reason. Thank you everyone Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted April 15, 2016 Share Posted April 15, 2016 Check your PM's. Quote Link to comment Share on other sites More sharing options...
FistyDollars Posted April 15, 2016 Share Posted April 15, 2016 If none of this works for you, it might be worth trying out Bizhawk , it's a TG16/CD emulator that was custom coded for accuracy/TAS and works great in conjunction with LaunchBox. Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted April 15, 2016 Share Posted April 15, 2016 So we figured out what the problem was, and it was the same problem for me. @angelobodetti had bad rips of the games, with good rips they're loading great in RA. Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted April 15, 2016 Share Posted April 15, 2016 Those filthy bad rips. Quote Link to comment Share on other sites More sharing options...
angelobodetti Posted April 19, 2016 Author Share Posted April 19, 2016 Yea it was the rips. They were working in PCEjin but not in RA so I assumed the rips were fine. All good now, thank you all for the help. Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted April 19, 2016 Share Posted April 19, 2016 angelobodetti said Yea it was the rips. They were working in PCEjin but not in RA so I assumed the rips were fine. All good now, thank you all for the help. Sweet, if you have any more questions feel free to ask them. Quote Link to comment Share on other sites More sharing options...
jameslit28 Posted November 26, 2017 Share Posted November 26, 2017 can anyone tell me how to run pcejin in full screen think im overlooking something:( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.