johnnyskullhead Posted May 28, 2017 Share Posted May 28, 2017 Hi sorry to post again just got hold of a Ferrari 430 PC wheel anyone know of any guides to set up with Model 2 and 3 emus Thanks in advance Quote Link to comment Share on other sites More sharing options...
DOS76 Posted May 28, 2017 Share Posted May 28, 2017 I have a Logitech G27 that I could never figure out how to get to work reliably with either emulator. Quote Link to comment Share on other sites More sharing options...
rexryan Posted May 28, 2017 Share Posted May 28, 2017 Before you can configure your controls a game must be loaded first. you will then navigate to the menu entry Game - Configure Controls... to change the key assigned to an action, double click the row you want to change then press a button or key you want to assign for that action. When you are done click close and your settings will be saved. Racing wheel setup If you want to set up the controls for a steering wheel, check all 3 “Steering” “Accelerate” and “Brake” boxes in the emulator’s control configuration menu. Double click each of them and enter their properties to ensure that the correct function in the drop down box matches the corresponding control you have entered. You may also need to ensure that you check “invert” for the “accelerate” and “brake” pedals when configuring them too otherwise they may not function correctly. Quote Link to comment Share on other sites More sharing options...
DOS76 Posted May 28, 2017 Share Posted May 28, 2017 Yeah I've done all that it just doesn't control it in any accurate kind of way. Quote Link to comment Share on other sites More sharing options...
rexryan Posted May 28, 2017 Share Posted May 28, 2017 5 minutes ago, DOS76 said: Yeah I've done all that it just doesn't control it in any accurate kind of way. Bummer..If i remember I had to change the xinput in the ini to get mine to smooth out. Quote Link to comment Share on other sites More sharing options...
johnnyskullhead Posted May 28, 2017 Author Share Posted May 28, 2017 got robbed , fucking break pedal broke !!!! 1 Quote Link to comment Share on other sites More sharing options...
johnnyskullhead Posted May 28, 2017 Author Share Posted May 28, 2017 sorry broken break pedal Quote Link to comment Share on other sites More sharing options...
vice350z Posted November 3, 2017 Share Posted November 3, 2017 Im wondering this also. I just got a G29 with shifter. Got it working great with the settings in Supermodel and Logitech Gaming Software but its not working correctly in the Model 2 emulator. Where its supposed to accelerate only as much as you're pushing the pedal down, in the Model 2 emu the slightest press acts as a button and give it 100% throttle. This screws up playing something like Daytona USA when you want to drift and control speed. Dayonta USA 2 works great in Supermodel. The key set up is minimal for Model 2 vs the Model 3 emulator. There's no telling it to use Y and Z axis..just sees it as joy 1 accelerator and joy 1 brake. Even with that I have to swap just so the correct pedals do what they're supposed to. Why bother supporting force feedback if you don't allow the correct key/wheel mapping? Quote Link to comment Share on other sites More sharing options...
andrea_ita Posted January 7, 2019 Share Posted January 7, 2019 what is the config for: ACCELLERATOR and BRAKE.. i have G29, thanks Quote Link to comment Share on other sites More sharing options...
reivaj Posted January 27, 2019 Share Posted January 27, 2019 en bigbox al conectar el g29 logitech este se queda pegado como si estuviera presionado hacia abajo el mando del volante. ayuda Quote Link to comment Share on other sites More sharing options...
reivaj Posted January 28, 2019 Share Posted January 28, 2019 I connect my g29 logitech in bigbox and the menu stays stuck. help Quote Link to comment Share on other sites More sharing options...
reivaj Posted January 28, 2019 Share Posted January 28, 2019 On 11/3/2017 at 6:30 PM, vice350z said: Im wondering this also. I just got a G29 with shifter. Got it working great with the settings in Supermodel and Logitech Gaming Software but its not working correctly in the Model 2 emulator. Where its supposed to accelerate only as much as you're pushing the pedal down, in the Model 2 emu the slightest press acts as a button and give it 100% throttle. This screws up playing something like Daytona USA when you want to drift and control speed. Dayonta USA 2 works great in Supermodel. The key set up is minimal for Model 2 vs the Model 3 emulator. There's no telling it to use Y and Z axis..just sees it as joy 1 accelerator and joy 1 brake. Even with that I have to swap just so the correct pedals do what they're supposed to. Why bother supporting force feedback if you don't allow the correct key/wheel mapping? I have the tecknoparriot emulator configured and it works well with the g29. if you want, I can share it with you Quote Link to comment Share on other sites More sharing options...
killa7977 Posted January 16, 2020 Share Posted January 16, 2020 On 1/28/2019 at 1:34 AM, reivaj said: I have the tecknoparriot emulator configured and it works well with the g29. if you want, I can share it with you You can share It with me if you want ? Quote Link to comment Share on other sites More sharing options...
azz09 Posted March 15, 2020 Share Posted March 15, 2020 Sega Model 3 / Supermodel works great with a mouse, easy to edit INI file and configure. BUT - Model 2 (Nebula) Emulator has no option that I can see, has anyone every been able to get a spinner mouse (Ultimarc) type device to work with Model 2? I open Daytona USA, then Game-Configure Controls, But under Steering, whether I check the box for Analog or not, it just defaults to "2 axis 8 button gamepad" and shows nothing else I just want the mouse X Axis to be what is used Stinks that they don't use an .ini file like Supermodel (Sega Model 3), I have played with the ini file in Model 2 folder, but that is just global settings like XInput and which mouse to assign to which player (if more than 1) But that does not seem to change anything Thanks for any help! Quote Link to comment Share on other sites More sharing options...
jhordi08 Posted May 31, 2021 Share Posted May 31, 2021 On 3/16/2020 at 12:18 AM, azz09 said: Sega Model 3 / Supermodel works great with a mouse, easy to edit INI file and configure. BUT - Model 2 (Nebula) Emulator has no option that I can see, has anyone every been able to get a spinner mouse (Ultimarc) type device to work with Model 2? I open Daytona USA, then Game-Configure Controls, But under Steering, whether I check the box for Analog or not, it just defaults to "2 axis 8 button gamepad" and shows nothing else I just want the mouse X Axis to be what is used Stinks that they don't use an .ini file like Supermodel (Sega Model 3), I have played with the ini file in Model 2 folder, but that is just global settings like XInput and which mouse to assign to which player (if more than 1) But that does not seem to change anything Thanks for any help! Hello @azz09, did you solve it? I have the same trouble. I have an ultimarc spintrak. I can use the 360º steering wheel in supermodel, mame, psx2, ppsspp, dolphin... But I can't do it in sega model 2. Thanks! Quote Link to comment Share on other sites More sharing options...
azz09 Posted June 1, 2021 Share Posted June 1, 2021 @jhordi08 From what I remember I never got it working, I think I gave up and just played supermodel. I did tons of searching but never found a way to get it working. If you find something please let us know! Quote Link to comment Share on other sites More sharing options...
Headrush69 Posted June 1, 2021 Share Posted June 1, 2021 On 5/31/2021 at 4:13 PM, jhordi08 said: I have an ultimarc spintrak. I can use the 360º steering wheel in supermodel, mame, psx2, ppsspp, dolphin... But I can't do it in sega model 2. The only way you'll get it to work is if you use some remapping software to map the Spintrak (mouse) to a virtual joystick. Additionally, if you are using a steering wheel and pedals, m2emulator needs separate pedals, not combined. Quote Link to comment Share on other sites More sharing options...
jhordi08 Posted June 2, 2021 Share Posted June 2, 2021 @azz09 @Headrush69 The only think I've found is this post: https://dsync.blogspot.com/2015/08/turning-mousespinner-into-steering.html It works but, when I want to select the vjoy device in M2 emulator, I can't fint it thanks! Quote Link to comment Share on other sites More sharing options...
Headrush69 Posted June 2, 2021 Share Posted June 2, 2021 1 hour ago, jhordi08 said: It works but, when I want to select the vjoy device in M2 emulator, I can't fint it thanks! I’ve not heard of FreePIE, but UCR provides that functionality and is quite popular. Maybe give that a try. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.