ejz372 Posted May 29, 2021 Share Posted May 29, 2021 @sundogakMan, it's all good. Thank you so much for this. I want to apologize because I made a mistake on the NES Translated, SNES Translated, and Sega Genesis Translated. I will still keep the ones you made. But what I meant to attach was the ones in the very first page that Viking made. If it's okay, please make them whenever you have time. Again I apologize. Quote Link to comment Share on other sites More sharing options...
sundogak Posted May 29, 2021 Share Posted May 29, 2021 12 hours ago, zugswang said: A few more I cannot find that are good quality, I only have these Capcom Z80 Capcom Commando Capcom Sony ZN-1 Capcom Sony ZN-2 Logos are from SirCamels excellent work he does in this thread to make high quality game/platform logos 1 Quote Link to comment Share on other sites More sharing options...
sundogak Posted May 29, 2021 Share Posted May 29, 2021 15 hours ago, ejz372 said: @sundogakMan, it's all good. Thank you so much for this. I want to apologize because I made a mistake on the NES Translated, SNES Translated, and Sega Genesis Translated. I will still keep the ones you made. But what I meant to attach was the ones in the very first page that Viking made. If it's okay, please make them whenever you have time. Again I apologize. 1 Quote Link to comment Share on other sites More sharing options...
sundogak Posted May 29, 2021 Share Posted May 29, 2021 (edited) 21 hours ago, zugswang said: Great quality, thanks a lot much appreciated. Here are the only logos I could find for the others. Thanks again Not sure if wanted "classic" in there or not. International Game Technology changed their logo at some point in 2015, so the older logo is likely more the "classic" one. The TAD one may be a bit since away from PS for a few days after this batch..... Also found the BFG one. It is Bell-Fruit Manufacturing which was renamed to Bell-Fruit Games (UK Company). The logo is from the "newer" company, a more stylized version of the original BFM version. Edited May 30, 2021 by sundogak Added TAD Corp and BFM logos 1 Quote Link to comment Share on other sites More sharing options...
ejz372 Posted May 30, 2021 Share Posted May 30, 2021 @sundogakThank you very much! You're the best!! 1 Quote Link to comment Share on other sites More sharing options...
zugswang Posted May 30, 2021 Share Posted May 30, 2021 7 hours ago, sundogak said: Not sure if wanted "classic" in there or not. International Game Technology changed their logo at some point in 2015, so the older logo is likely more the "classic" one. The TAD one may be a bit since away from PS for a few days after this batch..... Also found the BFG one. It is Bell-Fruit Manufacturing which was renamed to Bell-Fruit Games (UK Company). The logo is from the "newer" company, a more stylized version of the original BFM version. Excellent quality as usual, thanks a lot ? 1 Quote Link to comment Share on other sites More sharing options...
Nickjs Posted May 31, 2021 Share Posted May 31, 2021 (edited) This would really help me out whenever you time. If you could add some kind of "MODS" tag to it, it would be even better. Regardless, I really appreciate your help! Great work! Thank you! Edited May 31, 2021 by Nickjs Quote Link to comment Share on other sites More sharing options...
sundogak Posted June 1, 2021 Share Posted June 1, 2021 @Nickjs 1 Quote Link to comment Share on other sites More sharing options...
Nickjs Posted June 1, 2021 Share Posted June 1, 2021 3 hours ago, sundogak said: @Nickjs Thank you! These are perfect! Great job! 1 Quote Link to comment Share on other sites More sharing options...
sundogak Posted June 1, 2021 Share Posted June 1, 2021 On 5/30/2021 at 12:55 AM, zugswang said: A couple more when you are back Thanks again 1 Quote Link to comment Share on other sites More sharing options...
zugswang Posted June 2, 2021 Share Posted June 2, 2021 10 hours ago, sundogak said: Great quality, thanks a lot ? Quote Link to comment Share on other sites More sharing options...
RedHoodRobin64 Posted June 4, 2021 Share Posted June 4, 2021 These Logos are absolutely amazing, thank you all for doing this. I actually re done my entire arcade with it set to platform categories and it looks so clean. I was wondering if any one would be willing to make a bunch of pinball categories. I have pinball fx2 and 3 with all tables and I actually divided them up into different categories. Star Wars, Marvel, Video game based Tables, Movies and TV Based Tables. Williams, Baily, and Zen Originals. If any one would be willing to create logos or teach me how to do so would be greatly appreciated! Thanks For Your Time! You Guys Rock! Quote Link to comment Share on other sites More sharing options...
sundogak Posted June 5, 2021 Share Posted June 5, 2021 (edited) @RedHoodRobin64 Here are few. The others (Bally, Williams, Video Game Based, and Movies/TV Based) may be a bit before I get to them. Edited June 6, 2021 by sundogak Replaced rings with Pinball Swirl - Layer wasn't on 1 Quote Link to comment Share on other sites More sharing options...
RedHoodRobin64 Posted June 5, 2021 Share Posted June 5, 2021 Holy crap! Thank you! Those are absolutely perfect! Quote Link to comment Share on other sites More sharing options...
RedHoodRobin64 Posted June 5, 2021 Share Posted June 5, 2021 And absolutely take your time with the others. I am a very patient man. But just that alone is ausome. The video game based is so i could combine pvz from fx2, with doom, portal, and others. Dont want bethesda because then it would only be 3 tables. This way its a bit more so launchbox dosent repeat tables because theres not enough. Same with movies. I used your guys movies and tv logo way back towards the begining of this thread. The video game one i just couldnt find one that worked. But thanks again! Quote Link to comment Share on other sites More sharing options...
sundogak Posted June 6, 2021 Share Posted June 6, 2021 (edited) @RedHoodRobin64 Here are the Williams and Bally ones. Also replaced a few of the rings posted prior, there was a minor layer turned off on the pinball swirl pinball. Edit...added the rest. Edited June 6, 2021 by sundogak Added remaining logos Quote Link to comment Share on other sites More sharing options...
RedHoodRobin64 Posted June 6, 2021 Share Posted June 6, 2021 You friggen rock! Thank you so so much! How do you make them? I have tons of free time and would love to help out Quote Link to comment Share on other sites More sharing options...
sundogak Posted June 6, 2021 Share Posted June 6, 2021 1 hour ago, RedHoodRobin64 said: You friggen rock! Thank you so so much! How do you make them? I have tons of free time and would love to help out Those were done in Photoshop. Viking has two PSD templates for the rings in his zip collection. Check his first post of this thread. ZIP file: BLANK logo : Create your own logo. (2 PSD) That template PSD file will get you started if have Photoshop. Then it is just matter of finding good PNG logos, fonts, and then assembling the bits and pieces. I am not an graphic artist, so I am limited in that respect to the talents of others or examples of what others have done in this thread. For example, SirCamel's thread on logo requests is a good resource if trying to cleanup/find a logo. But I wanted to learn Photoshop, so this was easy way to start as well as allowed me to fill in some gaps. In the download sections you will also find folks who upload the PSDs. There are a couple of large download posts with PSDs for each platform type. LB theme makers also typically include high quality PNG logos as well as there are packs in download section. Otherwise it is Google. There are also PSDs for other types of rings (like pinball docklets) that you can find at Hyperspin and various pinball sites. If you don't have Photoshop, then GIMP is a free alternative but you will not be able to use the PSD templates (or action files if doing 3D boxes). I think there are some ring templates floating around for GIMP but I haven't used them. There are some blank rings where people who don't want to use GIMP or Photoshop can use them to do simple logo overlays using most graphics programs. You cannot get too fancy with them but if just doing a ring with logo for a game then works. Quote Link to comment Share on other sites More sharing options...
RedHoodRobin64 Posted June 6, 2021 Share Posted June 6, 2021 Thanks for the response. When i get back home from my anniversary im defenently gonna dip my toes in this and add creations on here for all to use. Very helpful. Thank you for everything. This comunity is just ausome Quote Link to comment Share on other sites More sharing options...
Mackano Posted June 13, 2021 Share Posted June 13, 2021 Great Job!!! logos that after reviewing I see missing.. Zemmix, Zemmix Neo, VTech Laser 200, VM Labs Nuon, Trivia Games, Timex Sinclair, Thomson TO8, Tatung Einstein TC-01, Tangerine Oric, Sord M5 (Clean Image), Sony SMC-777, Sega VMU (Virtual Memory Unit), Sega Ages, Samsung SPC-1000, NMK, Memotech MTX, Magnavox Oddyssey 4000, LucasArts, Konix Multi-System, Hidden Object Games (No Big Fish), GLUK, Galaksija, Eolith Gradation 2D System, Electronic Baseball (Entex), DreamGear, Comad Co., Casio Loopy, Canon X07, 8ing/Raizing (No only Raizing)... Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.