rrichter Posted January 18, 2018 Share Posted January 18, 2018 Ok looking for help to get a mess command line working for Apogee BK-01. I got this (apogee -cass "G:\New folder\LaunchBox\Games\Apogee BK-01\ROM_name.rka"), the (apogee -cass) will launch mess but won’t load a game. Any help would be great. Ty. Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted January 18, 2018 Share Posted January 18, 2018 Does it work outside of Launchbox ? Quote Link to comment Share on other sites More sharing options...
rrichter Posted January 18, 2018 Author Share Posted January 18, 2018 I’m using Mess, is there a way to test it outside of LB? I’m not familiar with using mess with out the command lines from inside launchbox. Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted January 18, 2018 Share Posted January 18, 2018 Depending on how old the version you are using is it should have it's own UI if you simply run the executableIt should look like that and you can select the system and it will tell you if it's available or not and if you got the bios files for it and they are recognized and correct or not. Quote Link to comment Share on other sites More sharing options...
rrichter Posted January 18, 2018 Author Share Posted January 18, 2018 Thank you. I’ll respond back after work tomorrow Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted January 18, 2018 Share Posted January 18, 2018 Good luck with it, generally with Mame / Mess you need to have the correct bios files and games that match the software lists that it uses to match up. Quote Link to comment Share on other sites More sharing options...
spycat Posted January 18, 2018 Share Posted January 18, 2018 Hi @rrichter As the Apogee BK-01 is a clone of the Radio86RK machine you will need both romsets apogee.zip and radio86.zip. Using MAME as the emulator in LaunchBox your Default Command-Line Parameters for the Associated Platform are apogee -cass Whether you launch a game directly from MAME or through LaunchBox you will only get as far as the screen with the Russian prompt. At the prompt type I and press Return. Next toggle Scroll Lock to switch the keyboard from Full to Partial emulation. Press TAB, Tape Control and Play. When your game has loaded, some hex codes will appear. Exit back to the machine and use Scroll Lock to enable Full keyboard emulation once again. Finally type G at the Russian prompt and press Return to open your game. 1 Quote Link to comment Share on other sites More sharing options...
flatuswalrus Posted May 25, 2018 Share Posted May 25, 2018 On 1/19/2018 at 6:53 AM, spycat said: At the prompt type I and press Return Just to confirm, is that a lower-case L on the keyboard? After pressing this do you normally get 4 0's appear before pressing Scroll Lock? On 1/19/2018 at 6:53 AM, spycat said: When your game has loaded, some hex codes will appear. After the 34 or so seconds of what can only be described as listening to Satan farting out of his dick hole I do not see any hex codes. On 1/19/2018 at 6:53 AM, spycat said: Finally type G at the Russian prompt and press Return to open your game. This does not matter if it is capitalized right? Just the letter G on the keyboard? After going through all these steps about 10 seconds later the screen just start flickering like something Alex DeLarge would have been made to watch in Stanley Kubrick's A Clockwork Orange. Quote Link to comment Share on other sites More sharing options...
HallowedTruth Posted July 14, 2019 Share Posted July 14, 2019 (edited) I have never been able to get tape games to work properly in mame i do all the proper steps but after playing the tape and going back to input proper commands it does nothing i dunno if it because i remapped scroll lock to left alt or what but no dice maybe it is the version of mame i use .210b i dunno i just cant get it to work after the tape has played i get no hex values or anything and if i go back and press g the cursor just blinks and i'm unable to input any further commands i also have this problem trying to run acorn atom and apf imagination machine tapes (the apf tapes are worse though because it doesnt boot into basic or anything of the sort just "rocket patrol" Edited July 14, 2019 by HallowedTruth Quote Link to comment Share on other sites More sharing options...
DrMaxwell Posted October 4, 2021 Share Posted October 4, 2021 I made a video a while back on how to install it and the launch sequence needed to load it up when you're inside the machine. How to Setup Apogee BK-01 on LaunchBox + RetroArch + RocketLauncher! Let me know if it helps anyone out. Quote Link to comment Share on other sites More sharing options...
ci2own Posted August 26, 2022 Share Posted August 26, 2022 Just in case someone needs it. In the actual version of mame 0.246 this would be the instructions after system loads: 1) Type I (The letter between U and O in a spanish keyboard) 2) Press Intro 3) Play the tape via MAME Menu 4) Wait until ends loading, and press Intro. 5) Type G and press Intro again. 1 Quote Link to comment Share on other sites More sharing options...
coliver33 Posted November 7 Share Posted November 7 @ci2own Have you been able to get Boulder Dash to load? There are 4 ROMs in the softlist for it, but I haven't been able to follow the above instructions and have any of them load. Rest of the ROMs in the set all load up fine. Quote Link to comment Share on other sites More sharing options...
ci2own Posted November 7 Share Posted November 7 2 hours ago, coliver33 said: @ci2own Have you been able to get Boulder Dash to load? There are 4 ROMs in the softlist for it, but I haven't been able to follow the above instructions and have any of them load. Rest of the ROMs in the set all load up fine. hash file shows the same way to load, but don't seem to work for me either. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.