neil9000 Posted May 28, 2017 Share Posted May 28, 2017 13 minutes ago, teeedubb said: Thanks for the info guys, ill try this out whem i have some free time. Its a shame that 'modern' light guns dont compare to the ones from yesteryear. Ive been playing around with the psmove in a attempt to use it as a mouse/light gun (due to it being more accurate than a Wiimote), and while it works, it has some calibration and movement issues which I haven't been able to work out as of yet. Oh really? I have a PSMove in a box somewhere that i could use. Could you provide any links on how you got it setup? Thanks. Quote Link to comment Share on other sites More sharing options...
ThePolish Posted May 29, 2017 Author Share Posted May 29, 2017 On 5/26/2017 at 4:05 AM, tsoukkis said: 2. Narrow the values of the X axis in the settings.json file, to pretend that your monitor is not that wide. Lower the value for right limit, increase the value for left limit. Do some trial and error. Another drawback with Touchmote, is that there is no calibration wizard. The wizard will be simple and it is there in some Wii games (hit on top left, hit on top right). But it needs some time and effort to develop that - for now I stick with editing the values in settings.json. I'm beyond excited to see this thread picked back up a little bit. I haven't been around in a bit - but following on youtube with Wood's videos. I'm going to try option 2, X and Y if its possible, area 51 is what I play alot of and have issues with. A calibration tool would be great. The biggest issue for me (well one of the 2) is the player 2.. Mouse is nice and quick, the X,Y joystick for player 2 lags a bit always. That's where I wish it could be calibrated. (The other issue I have with this setup is there isn't a way for my 2 wiimote light guns with dolphin bar, dualshock using scp driver, xbox 360 controller any anything thing else to play nice together with teh way xinput works - you have to literally reconnect everything after a reset and play with device manager to use the 4 slots) Quote Link to comment Share on other sites More sharing options...
tsoukkis Posted May 29, 2017 Share Posted May 29, 2017 Hm, I have not noticed any lag on XInput mode - but this is probably because of me, not because it is not there. (I was quite happy with the line up working properly, and didn't pay attention to the lag). 3 hours ago, ThePolish said: I'm beyond excited to see this thread picked back up a little bit. I haven't been around in a bit - but following on youtube with Wood's videos. Which Wood's videos are you talking about? Provide a link... Quote Link to comment Share on other sites More sharing options...
teeedubb Posted May 29, 2017 Share Posted May 29, 2017 18 hours ago, neil9000 said: Oh really? I have a PSMove in a box somewhere that i could use. Could you provide any links on how you got it setup? Thanks. I use the PSMoveService: https://github.com/cboulay/PSMoveService Wiki with a setup guide: https://github.com/cboulay/PSMoveService/wiki I have tried with both free camera drivers with the same results. Discussion regarding using the PSMove as a mouse: https://bitbucket.org/hawkinse/psmovefreepiebridge/issues/14/psmove-as-a-light-gun-via-mouse-emulation The two issues I have are the cursor drifting (I've tried re-calibrating very carefully, and while it helped, it still drifts) and when moving the cursor off screen and back again the cursor and PS move don't line up (its like the cursor stops at the edge of the screen but starts moving as soon as you move the PSMove back in the opposite direction) 3 hours ago, ThePolish said: (The other issue I have with this setup is there isn't a way for my 2 wiimote light guns with dolphin bar, dualshock using scp driver, xbox 360 controller any anything thing else to play nice together with teh way xinput works - you have to literally reconnect everything after a reset and play with device manager to use the 4 slots) I have a similar setup and I have found the same, though the xb360 wireless + scp reloaded seem to play nicely, the dolphinbar gets preference over them so I just keep it disconnected unless Im using a wiimote. 1 Quote Link to comment Share on other sites More sharing options...
ThePolish Posted May 29, 2017 Author Share Posted May 29, 2017 3 hours ago, tsoukkis said: Hm, I have not noticed any lag on XInput mode - but this is probably because of me, not because it is not there. (I was quite happy with the line up working properly, and didn't pay attention to the lag). Which Wood's videos are you talking about? Provide a link... I'm just speaking of the normal updates from the LB youtube page Quote Link to comment Share on other sites More sharing options...
neil9000 Posted May 29, 2017 Share Posted May 29, 2017 @teeedubb Thanks for the links ill have a look into this. Quote and when moving the cursor off screen and back again the cursor and PS move don't line up (its like the cursor stops at the edge of the screen but starts moving as soon as you move the PSMove back in the opposite direction) This is exactly how my airmouse works also, so i think that is just "what they do" unfortunately. Quote Link to comment Share on other sites More sharing options...
teeedubb Posted May 29, 2017 Share Posted May 29, 2017 (edited) 37 minutes ago, neil9000 said: @teeedubb Thanks for the links ill have a look into this. This is exactly how my airmouse works also, so i think that is just "what they do" unfortunately. Ahhh I didnt know that.. never used a air mouse before. Since the PSMove worked well as a lightgun on the PS3 I was hoping to be able to replicate this on PC. Also, the wiimote in mouse mode with a dolphin bar doesnt have this issue, so I guess its possible to do with that type of hardware Edited May 29, 2017 by teeedubb Quote Link to comment Share on other sites More sharing options...
neil9000 Posted May 29, 2017 Share Posted May 29, 2017 46 minutes ago, teeedubb said: Ahhh I didnt know that.. never used a air mouse before. Since the PSMove worked well as a lightgun on the PS3 I was hoping to be able to replicate this on PC. Also, the wiimote in mouse mode with a dolphin bar doesnt have this issue, so I guess its possible to do with that type of hardware Yeah i used PSMove with house of the dead overkill on PS3 and it worked great, that's why i want to try it on PC. Quote Link to comment Share on other sites More sharing options...
tsoukkis Posted May 30, 2017 Share Posted May 30, 2017 I did some testing yesterday with my code. Left Stick is not working properly - I have to check my code. So, for now, P1 as mouse, P2 as Right Stick. Quote Link to comment Share on other sites More sharing options...
imdavid555 Posted May 30, 2017 Share Posted May 30, 2017 What gun attachments are you guys using for wiimotes? Quote Link to comment Share on other sites More sharing options...
Tomkun Posted May 31, 2017 Share Posted May 31, 2017 21 hours ago, tsoukkis said: I did some testing yesterday with my code. Left Stick is not working properly - I have to check my code. So, for now, P1 as mouse, P2 as Right Stick. Yes... I noticed this. It seems to be moving both left and right stick at the same time. Right stick is fine. Quote Link to comment Share on other sites More sharing options...
tsoukkis Posted June 1, 2017 Share Posted June 1, 2017 Ok, corrected that! VERY VERY SILLY TYPO in the code. Download again the updated touchmote-mss from GitHub and rebuild. it should work fine now! (I have not tested it yet - just updated and still at work). 1 Quote Link to comment Share on other sites More sharing options...
Tomkun Posted June 1, 2017 Share Posted June 1, 2017 Working fine now. Although, I am having trouble with the nunchuck joystick. Nothing seems to register, but the c and Z buttons are working fine. Anyone else having that issue? Quote Link to comment Share on other sites More sharing options...
ThePolish Posted June 1, 2017 Author Share Posted June 1, 2017 On 5/30/2017 at 6:55 PM, imdavid555 said: What gun attachments are you guys using for wiimotes? I just picked up 2 nyko perfect shots at game stop for 5 a piece, spray painted them black and they've worked great since. Quote Link to comment Share on other sites More sharing options...
ThePolish Posted June 1, 2017 Author Share Posted June 1, 2017 On 5/29/2017 at 3:03 AM, teeedubb said: I have a similar setup and I have found the same, though the xb360 wireless + scp reloaded seem to play nicely, the dolphinbar gets preference over them so I just keep it disconnected unless Im using a wiimote. I didn't realize the dolphin bar got preference, I may have to physically do the same thing if a software solution isn't available. Biggest headache for me is having to remap mame or heaven forbid supermodel after a pc reset. Quote Link to comment Share on other sites More sharing options...
tsoukkis Posted June 1, 2017 Share Posted June 1, 2017 21 minutes ago, ThePolish said: I just picked up 2 nyko perfect shots at game stop for 5 a piece, spray painted them black and they've worked great since. 5 a piece?! Where is this stop?! I have two completely junk "guns" from eBay... These are not very nice. I had to mod them a bit, for the trigger button to get pressed all the way, but for sure, not something as nyko perfect shot! But for sure, better than creating a mod from custom materials! 28 minutes ago, Tomkun said: Although, I am having trouble with the nunchuck joystick. Nothing seems to register, but the c and Z buttons are working fine. Anyone else having that issue? Hm, nunchuck is another story. I don't know how easy it is, but since C and Z are working fine, I can live with it!!! Quote Link to comment Share on other sites More sharing options...
ThePolish Posted June 1, 2017 Author Share Posted June 1, 2017 6 minutes ago, tsoukkis said: 5 a piece?! Where is this stop?! Haha, they were used at a local Ohio Gamestop store. They're not nice and heavy like an arcade lightgun, but feel almost balanced with the wiimote inserted. Could probably be better if I put a small weight on the bottom of the mag well . Quote Link to comment Share on other sites More sharing options...
imdavid555 Posted June 1, 2017 Share Posted June 1, 2017 1 hour ago, tsoukkis said: 5 a piece?! Where is this stop?! I have two completely junk "guns" from eBay... These are not very nice. I had to mod them a bit, for the trigger button to get pressed all the way, but for sure, not something as nyko perfect shot! But for sure, better than creating a mod from custom materials! Hm, nunchuck is another story. I don't know how easy it is, but since C and Z are working fine, I can live with it!!! It doesn't happen to be these guns: LINK 1 hour ago, ThePolish said: Haha, they were used at a local Ohio Gamestop store. They're not nice and heavy like an arcade lightgun, but feel almost balanced with the wiimote inserted. Could probably be better if I put a small weight on the bottom of the mag well . Dang. These are pretty hard to find online now except for a bunch of used ones on ebay. Going to try a GameStop after work. Quote Link to comment Share on other sites More sharing options...
teeedubb Posted June 1, 2017 Share Posted June 1, 2017 5 hours ago, imdavid555 said: It doesn't happen to be these guns: LINK I got a casing like the one you linked and am happy with it. It feels solid and has a bit of weight to it. I also got a Wii sharpshooter casing as some Wii shooters use both controllers. Quote Link to comment Share on other sites More sharing options...
SirTay Posted June 16, 2017 Share Posted June 16, 2017 (edited) Is anyone else using Windows 10? I attempted this the other night and was unable to have Mame recognize my WIimote but I may try again from scratch. Edit: Got the Wiimote to work with the exception of the +, -, 1, and 2 buttons. Tried to map them to the keyboard in an effort to start the game and add coins with the + and - buttons for some reason it won't work. Still, this is a lot of fun! Edited June 16, 2017 by SirTay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.