Zombeaver Posted February 7, 2017 Share Posted February 7, 2017 Just now, neil9000 said: Fullboot is needed for some games though, so you might want that back on. I think that's pretty rare though - honestly I think I'd probably just enable that on a per-need basis via custom command line parameters rather than just applying it to everything (especially in my case since I'm using custom command line parameters to indicate a game config for every game anyway). To each their own though. Quote Link to comment Share on other sites More sharing options...
neil9000 Posted February 7, 2017 Share Posted February 7, 2017 Yeah, I'm not using custom configs so its a catch all for me just in case. I know for a fact that Amplitude needs it and I play that quite a bit, so I just leave it on. As you say though each to there own. Quote Link to comment Share on other sites More sharing options...
Crush Posted February 8, 2017 Share Posted February 8, 2017 PCSX2: Check that in the CDDVD menu ISO is selected. Also it is a good idea to download latest version: http://buildbot.orphis.net/pcsx2/index.php Quote Link to comment Share on other sites More sharing options...
JJLR Posted February 8, 2017 Share Posted February 8, 2017 20 hours ago, neil9000 said: Yeah, I'm not using custom configs so its a catch all for me just in case. I know for a fact that Amplitude needs it and I play that quite a bit, so I just leave it on. As you say though each to there own. 21 hours ago, Zombeaver said: I think that's pretty rare though - honestly I think I'd probably just enable that on a per-need basis via custom command line parameters rather than just applying it to everything (especially in my case since I'm using custom command line parameters to indicate a game config for every game anyway). To each their own though. Here's all my screens.... and also, thanks in advance to all to helping me with this !!!!!! Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 8, 2017 Share Posted February 8, 2017 Can you show me the "Launcher" tab for that game as well please? Quote Link to comment Share on other sites More sharing options...
Cauptain Posted February 8, 2017 Share Posted February 8, 2017 Just now, JJLR said: Here's all my screens.... and also, thanks in advance to all to helping me with this !!!!!! Please, get latest version here: http://buildbot.orphis.net/pcsx2/ Try and reply. I used this version and works flawless for me. Claudio Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 8, 2017 Share Posted February 8, 2017 You don't have to use the buildbot version. I'm using 1.4.0 stable and it works just fine... Quote Link to comment Share on other sites More sharing options...
neil9000 Posted February 8, 2017 Share Posted February 8, 2017 45 minutes ago, JJLR said: Here's all my screens.... and also, thanks in advance to all to helping me with this !!!!!! Mine looks the same as that also, but works fine. I am using version 1.5.0. Here's my launcher tab for comparison. Quote Link to comment Share on other sites More sharing options...
Cauptain Posted February 8, 2017 Share Posted February 8, 2017 (edited) Just now, Zombeaver said: You don't have to use the buildbot version. I'm using 1.4.0 stable and it works just fine... Agree, but no have any problem with DEV versions. Claudio Edited February 8, 2017 by Cauptain Screen post 1 Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 8, 2017 Share Posted February 8, 2017 Just now, Cauptain said: Agree, but no have any problem with DEV versions. The dev versions are fine too, I'm not debating that, all I'm saying is 1.4.0 definitely works via Launchbox because that's what I'm using and telling someone to use a different version as if that's going to fix it doesn't make much sense to me; especially since 1.4.0 is working for him outside of Launchbox. @JJLR I'll still need to see the Launcher section of that game entry in your library. 1 Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 8, 2017 Share Posted February 8, 2017 @JJLR when you say that it's not starting a game and it's showing "just the emulator" is it actually showing the PCSX2 UI when you try to start a game? Because that shouldn't be possible with --nogui in your command line parameters... 1 Quote Link to comment Share on other sites More sharing options...
JJLR Posted February 10, 2017 Share Posted February 10, 2017 (edited) On 08/02/2017 at 7:50 PM, Zombeaver said: The dev versions are fine too, I'm not debating that, all I'm saying is 1.4.0 definitely works via Launchbox because that's what I'm using and telling someone to use a different version as if that's going to fix it doesn't make much sense to me; especially since 1.4.0 is working for him outside of Launchbox. @JJLR I'll still need to see the Launcher section of that game entry in your library. Here is my launch screen: My ISOs are in a folder inside PCSX 1.2.1.. but Im using other version for emulate the games.... I only kept this old version, because in the newest ones, I cannot acces memory card management... Edited February 10, 2017 by JJLR Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 10, 2017 Share Posted February 10, 2017 What actually happens when you try to launch it? And when you said it's working outside of Launchbox, is that via 1.4.0 specifically? I notice that's what you're using in the emulator entry but the game is in a 1.2.1 path. That's fine, but I want to verify that when you say "it's working" you're talking about 1.4.0 because that's what your emulator entry is set to use. Quote Link to comment Share on other sites More sharing options...
LogicalEgo Posted February 11, 2017 Share Posted February 11, 2017 Legit question, please dont be offended and I may have missed the post but why not use 1.4.0? Why do you need to use 1.2 for the memory card manager? I have the same rom and using default settings, works great. Quote Link to comment Share on other sites More sharing options...
JJLR Posted February 11, 2017 Share Posted February 11, 2017 53 minutes ago, Zombeaver said: What actually happens when you try to launch it? And when you said it's working outside of Launchbox, is that via 1.4.0 specifically? I notice that's what you're using in the emulator entry but the game is in a 1.2.1 path. That's fine, but I want to verify that when you say "it's working" you're talking about 1.4.0 because that's what your emulator entry is set to use. I'm using 1.4.0 and the ISOs runs perfectly directly on the emulator, but when I started through Launchbox (desktop or bigbox), the emulator stops at the screen below Quote Link to comment Share on other sites More sharing options...
JJLR Posted February 11, 2017 Share Posted February 11, 2017 10 minutes ago, keltoigael said: Legit question, please dont be offended and I may have missed the post but why not use 1.4.0? Why do you need to use 1.2 for the memory card manager? I have the same rom and using default settings, works great. Because my 1.4.0 does not load the memory card management screen... maybe something wrong in my config, but I tried a lot and nothing solved this issue. Due to this, I kept 1.2 only to manage memory cards Quote Link to comment Share on other sites More sharing options...
Cauptain Posted February 11, 2017 Share Posted February 11, 2017 JJLR, make this1 - Download and use version 1.5.02 - Make a default path from your roms/is os like: C:/Emulators/System/Roms or IsosDon't use space in name roms/isos ; capcom_vs_snk2.isoTry and reply. Claudio Enviado de meu ASUS_Z00AD usando Tapatalk Quote Link to comment Share on other sites More sharing options...
JJLR Posted February 11, 2017 Share Posted February 11, 2017 14 minutes ago, Cauptain said: JJLR, make this 1 - Download and use version 1.5.0 2 - Make a default path from your roms/is os like: C:/Emulators/System/Roms or Isos Don't use space in name roms/isos ; capcom_vs_snk2.iso Try and reply. Claudio Enviado de meu ASUS_Z00AD usando Tapatalk I've updated for 1.5.0 and now its working perfect !!!! Valeu Claudio !!!!! Quote Link to comment Share on other sites More sharing options...
Crush Posted February 11, 2017 Share Posted February 11, 2017 (edited) With 1.5.0 you can have automatic memory card management. Check "Automaticaly manage..." in the "Memory Card Manager" window and select the folder you want. No need to worry about full cards anymore and you can manage the saves from your OS as all saves are now single files. Edited February 11, 2017 by Crush 1 Quote Link to comment Share on other sites More sharing options...
Zombeaver Posted February 11, 2017 Share Posted February 11, 2017 Glad you got it sorted! Still not entirely sure what the problem was. 1.4.0 still works fine through LB for me. *shrug* Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.