fromlostdays

Can confirm. Do yourself a favor for now and don't try to mix the two. It's infuriating. The only glimmer of hope I remember is the four modes for the dolphinbar. But there is surprisingly little info on this and trial and error gave me ulcers.

Many many many of the wheels over at HyperSpin are community generated and freely available on the site. Many more are available on the artist's personal sites, the hyperspin FTP, and via HyperSync (HyperSpin's soon to be defunct media downloader). I respect that no one here tried to pull a snatch and grab immensely. A lot of the people that do the wheels however are awesome folks and wouldn't mind sharing if asked. But I do agree LaunchBox shouldn't share that content on their own database unless the actual artist uploads it there, or gives express permission to someone else to do it. I actually thought long and hard about it as I have the wheels on my own LB setup, but then I'm a premium member of both sites. The issue in this case really has less to do with front ends, and more to do with respecting and crediting the people who took the time to design the images. Nor is that particularly easy as there is so much media available over there that it would be hard to find the actual persons responsible for a given set. It may be simpler for LaunchBox to encourage it's own artists to fill in the gaps.

What I can't do yet is get RL to launch FSUAE + WHD roms. (It works with ADF only as far as I can figure out.) is there a way to have launchbox launch FSUAE with the WHD set (works fine in the emulator itself, by the way, all you do is set up an account with FSUAE and put the roms in the Download folder. Scans for them and everything). Sorry if this has been answered, I've been so busy I'm like snatching time at this point to get on the forums.

Just a few more things to note here: FSUAE (newest version not sure of the dev version) will automatically sync to xinput controller. Its pretty awesome. This alone has me choosing it as preferred. FSUAE is not difficult to set up. You basically just put the kicks in the correct place (and maybe point the emu to them) IPF files seem worthless. I mean I'm no guru on this one either, but as soon as I switched to ADF it was like ten minutes later I had games running. The WHD set IS currently readily available with a little googling. There is an FSUAE core for RetroArch. I can't get it to work, but I've read that people have. I don't plan on trying anymore since FASUE proper supports xinput automatically. I'll switch if it becomes less of a pain. You CAN launch FSUAE through Launchbox using RocketLauncher. This isn't the ideal solution for a lot of people, but it does work.

Hey Styphelus. :D. Yeah, that command line was all wrong. Firstly, it pointed to RocketlauncherUI. Secondly, that entire section should be left out, like you did in the fix. Are you using the Hyperspin plugin, or the Rocketlauncher plugin? Just curious.

So I was just playing around with BigBox, and for the first time set the button on my control up to switch views. Dude, amazing job. That box art reflective view. It's gorgeous. And the ability to switch seamlessly back to list view.... I sort of feel like little mac just knocked out tyson. Thanks for all the hard work. It freaking paid off.

Screenshot those errors. Keep in mind not all artwork exists for all systems, and unless I'm wrong you can get an error if the artwork doesn't exist, or if you're rom is named too oddly for it to be recognized correctly by the database. Its not uncommon for me to get a few errors. Sometimes I have to go into launchbox and edit the rom info so the database recognizes it.

Ditto the RA core. I couldn't figure it out. Sorry, but this is one system I actually gave up on.

Definitely worth it. You could get away with an insane amount of media for cheap too, but I support the site with the lifetime membership. Been over there for years, and I've seen the amount of work they do. It is definitely not a flashy site with no content. Quite the opposite. Its got too much content haha. Plus, the dev is a cool character. Now if we could just get some DOS boxes. sigh.

You don't have to change any directories. Though you'll have to do it one at time. There is probably a better way to do this, but you can: Import the exe as if it were a rom. You can just drag it into launchbox if you want, or use the browse method. System "PC" or you can create your own called Big Fish. Once the exe is imported, right click it in launch box and select "Edit" Go to the "Emulation" tab and untick "Use an emulator to play this game". This will tell launchbox its an application (exe) and it should launch fine after that. Repeat.

If this technology had been around for decades many more people might actually be bilingual. It's not about what's the point of trying to learn, its that this is probably an awesome learning tool, no?

You could also set up Rocketlauncher as your emulator for just PS2. It already has the functionality to unzip and launch your .bin files before your .cue files.

When you start a mame game you will get a gameinfo screen and a warning screen (Nag screen). It's no big deal, it'll prompt you to press left then right on the joypad to clear it. I guess you can skip the game info screen via cli command. To skip the nag screen, you have to download a version of mame compiled for no-nag.

It's even worse than that Autumn. It isn't even that people are thinking crimes and violence might take place. It's that they'd would rather marginalize thousands of people rather than take the the chance they might have to see something that makes them uncomfortable. Having said that, we have our problems as country, but at least we're having a national dialogue about it. When you ask 300 plus million people their opinion, you're going to hear stuff you don't like. :D

Just a heads up, I read that MAME 173, the emulator, has noticeably worse performance than 172, and I'm guessing this extends to its forks. It may be advantageous to wait for 174.

You can search the forums too, plenty on this. It all depends on what you want to emulate, and personal preference. If you're going the wireless route, I don't know of anything that beats the PS4 controller for the Dpad and in terms of ease of use with windows (the software you use will trick windows into thinking its an xbox controller, and that makes life easier.) If you're doing wired, I mean, the sky is the limit. You can use anything, but I'd really recommend using something that will at least mimic xbox controller functionality in windows. It really is a lifesaver. I personally splurged on an xbox elite controller and for a wonder the Dpad is pretty good. I wouldn't say its the end all be all. I'd give that title to some of the wii pro controllers. (These would be the ideal solution for anything dpad related, but even with the mayflash dolphin bar I had a lot of problems and eventually gave up.) For me, a couch potato, the xbox one controller's dpad made it a no no, but with the elite, I use it for everything. From nes right up to wii. Launchbox + RetroArch + Xbox (Or mimicked) controller is probably the easiest way to emulate dozens, maybe even over 100 systems, and, bonus, autosync with steam big picture and a lot of pc games. I also use Kodi, and I have front ends launching front ends sometimes, haha. It really is a sickness.

Haha, I forgot actually be forthcoming: even factoring in my computer which I didn't buy for this purpose, expenditures aren't even a candle in the wind to the value of what I actually have both monetarily and personally. Anyway, I'm off of work all day and its making me sappy, haha. I haven't worn anything other than a black hanes T with a cheap button up over it in years. Google Wallet is a workable alternative for donation, but having said that, I think there's something to be said for .... advertising a bit on the forum with your users. So maybe if you buy a license you get a tag "Premium" or something under your name on the forum and your profile, and if you donate you get another tag like "Contributor" (although that might be misleading in terms of what was contributed. I think people who are on the fence or even just coming here for help with LaunchBox will see the people helping them with those tags, and it might make a difference.

Being forthcoming.... I mean... really.... when I think of the amount of stuff I have to put in launchbox that I got for free.... and I compare that to the dollars I've spent... Lets put it this way, I've donated multiple times to RocketLauncher (every time a new feature that I love comes out) and I kept a month by month EmuMovies subscription so long that Circo himself was like "Dude, you've already paid well over a lifetime subscription, let me give it to you". I actually told him no, then bought one a while later. On flip side, one of the best parts about this hobby is the community of people who just like the same shit you like, and you get to ask for help and be helpful there. In summation, you should certainly accept donations, and I'm glad you're taking the stance you have on piracy.

So I keep my video library separate from Launchbox. A while ago I figured out how to set the video path to the different directory and all was well. Today, not really thinking, and its been a while since I did it, I instead selected all my SMS (Sega Master System) games, Bulk Edit, Video Path, wasn't paying attention and when I clicked my video folder in Browse I figured why not and went ahead and clicked Ace of Aces.mp4. (The bulk video editor for some reason is looking for a file, not a folder). At any rate, now the Ace of Aces.mp4 plays for every SMS game I have. :( Hahaha. I went in through manage platforms, edited the actual video path, but nothings changed. I tried restarting Launchbox and Refreshing All Media. I don't mind reimporting, but will that fix it? Thanks!

Still not able to replicate the error. Changed a few mame games over to RA and launched fine. I do suspect this may have something to do with RocketLauncher launching a different config file. Launchbox defaults to the standard RA config, but it's definitely a quandary.

I understand why RL would change the boot from CLI to enabled. It uses a bunch of CLI options. What I don't understand is: A: Why that would break you're Launchbox launching? (Unless you're not using RL in Launchbox and using RA as your emulator) I use the exact same setup you do, CLI enabled, Launchbox to RL to RA, and I've never had any problems. B: RocketLauncher should not be changing the read config line at all. It doesn't on mine. I'm wondering if that's what broke the launch? C: There is no reason that anything would launch in RL and NOT in LB or HyperSpin (Using RL) except that they aren't communicating correctly to each other. Are you sure you're using RL through Launchbox correctly? I can pretty much assure you something else is afoot, as again, I have the same exact set up with no problems. If you're sure that launching a game through RL is changing the read config line, that's got to be a bug and should probably be reported on the RL forum, but I'm not convinced it is as I'm up to date on LB, RL, and RA and not having this problem.

Stimpy, Open jpg in paint, click File, Save As, and then save as png. Should do the trick. You may lose transparency? Not sure.

The Atari Jaguar CD, as far as I know, can only be emulated using project tempest, and furthermore, only like 2 of the games work at all. The regular Jaguar works well enough for me in RetroArch. No Bios required.

Way to make me FEEL BAD, Autumn. But no yeah it totally does. :D