XC-3730C Posted February 3, 2017 Share Posted February 3, 2017 Im not entirely certain and dont want to give false information but I know someone who may know: @SentaiBrad I know that DosBox comes baked in. And I use Retroarch which is supported and all of it's cores. Aside from that PCSX 2 and Dolphin both are supported which covers the majority of your emulation needs. You can use any emulator you want and the list of emulators is quite large. Edit: Here is a post I made in a thread about recommended emulators to use. My list has changed slightly but it's mostly still the same. I am not seeing your link. Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted February 3, 2017 Share Posted February 3, 2017 Quote Link to comment Share on other sites More sharing options...
XC-3730C Posted February 3, 2017 Share Posted February 3, 2017 I don't know if it is because I use Tapatalk that the link doesn't show, but I found it, but the page linked looks like this: Quote Link to comment Share on other sites More sharing options...
Lordmonkus Posted February 3, 2017 Share Posted February 3, 2017 The Reply to WIP should be the link if you can click that. Quote Link to comment Share on other sites More sharing options...
SentaiBrad Posted February 4, 2017 Share Posted February 4, 2017 Our YouTube tutorials are all the systems that I've suggested for over a year now. Some have version 2's, and several parts (Like MAME and MESS). There were two tutorials that I re-did because better emulators were found or issues were fixed, and that was the Sega Saturn and TurboGrafx-16 tutorials, both have an updated tutorial that is suggested over the original. Quote Link to comment Share on other sites More sharing options...
zetec-s-joe Posted February 4, 2017 Share Posted February 4, 2017 I have an Alienware Alpha R2, i7, 8GB Ram, Full size 960 Runs everything at full speed, emulators limit it, runs cemu too its current full potential, Doesnt sturggle with a thing I throw at it Quote Link to comment Share on other sites More sharing options...
dragon57 Posted August 25, 2017 Share Posted August 25, 2017 On 1/6/2017 at 9:23 PM, cammelspit said: Currently up to 57,784 games and counting. This is not including most of my OLD 8-bit computer stuff except it does include the Tandy CoCo, Commodore64 but only the tapes and I also have the amiga imported even though I haven't gotten those to work yet. I did find an awesome way to get eXoDOS and win3Xo fully imported into LB with the artwork all at once so that is a good 6K+ games right there. My PS2 collection is only about 60 games large but I don't have enough HDD space for the whole set, about 5-6TB worth. I am also missing the EUR and JAP Gamecube collections, even though I do have a good chunck of those games not released here. At least this is the largest collection here so far in the thread. I am curious to see how many people have such large collections. Now all I need to do is put a NAS together, too much hassle all being local. lol @cammelspitI was wondering if you would share with me how to get my Tandy Color Computer games running under LaunchBox? I have found most of the emulators, but am having issues getting the command line options set so the games start after selecting them. TIA Quote Link to comment Share on other sites More sharing options...
cammelspit Posted August 25, 2017 Share Posted August 25, 2017 1 minute ago, dragon57 said: @cammelspitI was wondering if you would share with me how to get my Tandy Color Computer games running under LaunchBox? I have found most of the emulators, but am having issues getting the command line options set so the games start after selecting them. TIA Unfortunately, you are going to be forced to not have the game auto launch AFAIK. The only emulator I will use at this point is the MAME/MESS core. As such, it won't allow the automatic input of commands after the CoCo has booted up. So you will have to manually type in the CLOAD or LOADM command for tapes and so on and so forth. The one or two other emulators I have tried to play CoCo games with simply didn't cut the mustard in terms of accuracy and such. Though, to make it easier on yourself, I would highly recommend splitting the Tape/Cart/Floppy games into their own platforms. I know, it's not ideal but at least this way you know what commands you need to use once the emulation actually starts up, this is what I did. Quote Link to comment Share on other sites More sharing options...
harryoke Posted August 25, 2017 Share Posted August 25, 2017 at the moment im on over 70,000 and still not finished , I do have access to Scene Server dump so im able to get any scene released game from around 1995 onwards Archiving is my passion and data preservation. My Artwork & video's are just something i do when im bored 2 Quote Link to comment Share on other sites More sharing options...
dragon57 Posted August 26, 2017 Share Posted August 26, 2017 1 hour ago, cammelspit said: Unfortunately, you are going to be forced to not have the game auto launch AFAIK. The only emulator I will use at this point is the MAME/MESS core. As such, it won't allow the automatic input of commands after the CoCo has booted up. So you will have to manually type in the CLOAD or LOADM command for tapes and so on and so forth. The one or two other emulators I have tried to play CoCo games with simply didn't cut the mustard in terms of accuracy and such. Though, to make it easier on yourself, I would highly recommend splitting the Tape/Cart/Floppy games into their own platforms. I know, it's not ideal but at least this way you know what commands you need to use once the emulation actually starts up, this is what I did. Thanks for the super quick reply. I was afraid of that. I won't have any issue remembering the commands to type afterwards, but the rest of my family will. Sigh. Was one of the other emulators you tried Xroar? I just downloaded it and have finally figured out how to get it to auto-run the games. Unless I hit a lot of issues with it, I might have to go with it so everyone using my arcade cab can enjoy the old time Color Computer hits! Quote Link to comment Share on other sites More sharing options...
cammelspit Posted August 26, 2017 Share Posted August 26, 2017 You know, I don't really remember. It has been quite some time since I set this all up and several tens of thousands of imported games later. At this point, I don't think My wife or my son would ever even care about a CoCo game. I remember as a Kid having one, a tape drive, a few cats, it was certainly an experience. Though, if that emulator can launch automatically, I will have to take a good look at it. If the accuracy is up to snuff, I may just have to switch out for that one. Thanks for that one buddy and good luck! Quote Link to comment Share on other sites More sharing options...
DarkMain Posted August 27, 2017 Share Posted August 27, 2017 On 1/8/2017 at 9:38 AM, SentaiBrad said: We're actually limited by their API, so we can really only do what it lets us. There may be some stuff that we can do after the list is imported, but for example we can't import only games you have installed, every game must be added. I know its a bit off topic, and I'm quoting an old post but... The AMD Drivers can "Scan" for installed games and will pick up any steam games using the SteamID rather than the .exe so its possible. Now I'm not a programmer, but couldn't you at the very least tell Launchbox where steam is installed (I'm sure it can do that on its own as well) and then have the software look at "libraryfolders.vdf" to see where all the "Steam Libraries" are and then scan for any "appmanifest_***.ACF" files? The .ACF files contain the steam ID and the game name (The file name also contains the Steam ID). Launchbox could then just import the games you have installed using the ID and once they are imported you can then grab the metadata. Quote Link to comment Share on other sites More sharing options...
garbanzo Posted August 27, 2017 Share Posted August 27, 2017 My Games folder has over 300,000 files in it, but I only put them in LB if I really enjoy playing them, so I have less than 100 set up at the moment. I do have a lot of duplicates though, since I collect ROM sets. Quote Link to comment Share on other sites More sharing options...
Landcross Posted September 3, 2017 Share Posted September 3, 2017 On 26-8-2017 at 1:19 AM, harryoke said: at the moment im on over 70,000 and still not finished , I do have access to Scene Server dump so im able to get any scene released game from around 1995 onwards Archiving is my passion and data preservation. My Artwork & video's are just something i do when im bored Do you have full sets of all those consoles or just games you picked yourself? How much storage do you use in total? Quote Link to comment Share on other sites More sharing options...
jobestroud Posted September 9, 2017 Share Posted September 9, 2017 I have over 1.5 TB worth of games myself. Launchbox always seems to freeze though when I try to update my list. I let it run for 6 hours and it never finished updating my list. Without my Arcade games in the list I am at 3131 games. With my arcade games I am well over 10k. Quote Link to comment Share on other sites More sharing options...
harryoke Posted September 9, 2017 Share Posted September 9, 2017 (edited) On 03/09/2017 at 8:49 PM, Landcross said: Do you have full sets of all those consoles or just games you picked yourself? How much storage do you use in total? i have fullsets mainly , size wise its split up over various HDD but at a rough guess over 5TB easy. a fullset of ps2 is around 2tb Edited September 9, 2017 by harryoke Quote Link to comment Share on other sites More sharing options...
Landcross Posted September 10, 2017 Share Posted September 10, 2017 18 hours ago, harryoke said: i have fullsets mainly , size wise its split up over various HDD but at a rough guess over 5TB easy. a fullset of ps2 is around 2tb Hmm, 5TB doesn't sound that bad. I bought a 4TB external drive a week or 2 ago to store all my roms etc. But, it's by far not enough But, if buy more storage, I want to do it the proper way with a nas and all that instead of keep adding more external drives. And maybe some redundancy as well. But that's all going to cost quite a lot Also, I suppose with 'fullset' you mean just USA or something like that? Because the fullset I came across contained all regions and was something like 10TB... Quote Link to comment Share on other sites More sharing options...
harryoke Posted September 10, 2017 Share Posted September 10, 2017 Yes ps2 is USA full set , I really do need to sort all my roms and transfer them to a single location. Quote Link to comment Share on other sites More sharing options...
ckp Posted September 12, 2017 Share Posted September 12, 2017 (edited) You guys might want to check into the @DOS76 home "data center" storage setup. He adds internal and external usb multi drive cases to appear as a single drive letter and with redundancy in such a way that any drive can be read on any Windows computer without any RAID drivers (it's not RAID). This makes things very simple and still managed by Windows which also helps to keep simple (no RAID Linux stuff here). And best of all, the data is all local and not over the network (but can be shared with other devices if desired). The software he uses to manage all this is called DrivePool and costs only $29.95: https://stablebit.com/DrivePool/Features I've used many NAS systems myself, but when they go bad, they really go bad, and often leave you screwed if you don't have a backup somewhere else. Edited September 12, 2017 by ckp 1 Quote Link to comment Share on other sites More sharing options...
fromlostdays Posted September 12, 2017 Share Posted September 12, 2017 (edited) I"m approaching 90 thousand games. Takes up more than 6 terabytes. (Fit everything but exodos and win3xo on there though). Bear in mind a HUGE portion of those games are for old computers, clones, and just bad games. I'll never import them all into launchbox. Wanted to add I keep games that you can't even emulate, as in n-gage etc. There's the, I think, 32 thousand or so I have in launchbox, and I'm pretty much done except to add new games as I get them in steam. Everything emulate-able, though, I do have launching through rocketlauncher. Edited September 12, 2017 by fromlostdays 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.